# New Elite Woodworker using Buildbotics controller?

**URL:** <https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213>\
**Category:** Gen 2 Elite Series\
**Created:** [September 18, 2026, 2:59pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213 "2026-09-18T14:59:05Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![BargerKona](https://avatars.discourse-cdn.com/v4/letter/b/ecae2f/32.png) [@BargerKona](https://forum.onefinitycnc.com/u/BargerKona)\
**Post date:** [September 18, 2026, 2:59pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/1 "2026-09-18T14:59:05Z")

</div>

New Elite Woodworker arriving in a few weeks. When I did the machine configuration in Vetric, after downloading the current machines, it installed the Elite (Redline) Woodworker and a Buildbotics controller. IS this correct for the new machines shipping today? I kinda assumed it would install a Redline controller?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [September 18, 2026, 3:01pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/2 "2026-09-18T15:01:53Z")

</div>

Buildbotics is not elite.

Here’s the video to follow:

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/7/e76736e9290c9e8e9f73610c974e39860ae35f8d.jpeg "Setup A Post Processor & Exporting Gcode For Vectric with the Redline Motion Control System") ](https://www.youtube.com/watch?v=RZJ6wh-3KDU)

---

<div class="post-metadata">

**Author:** ![BargerKona](https://avatars.discourse-cdn.com/v4/letter/b/ecae2f/32.png) [@BargerKona](https://forum.onefinitycnc.com/u/BargerKona)\
**Post date:** [September 18, 2026, 3:41pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/3 "2026-09-18T15:41:46Z")

</div>

That is exactly what I did and the “cloud” installed the buildbotics controller. Where do I get the Redline controller?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [September 18, 2026, 3:51pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/4 "2026-09-18T15:51:32Z")

</div>

Please double check the video. We fear you my not have followed it exactly.

---

<div class="post-metadata">

**Author:** ![BargerKona](https://avatars.discourse-cdn.com/v4/letter/b/ecae2f/32.png) [@BargerKona](https://forum.onefinitycnc.com/u/BargerKona)\
**Post date:** [September 18, 2026, 3:56pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/5 "2026-09-18T15:56:50Z")

</div>

I just double checked the video. My Machine Configuration management screen has Elite (Redline) Woodworker as the name. Manufacturer is Onefinity. Model is Elite (redline) Woodworker. Controller is Buildbotics. The Post processors are Infinity Realtime RTSX (inch and mm). I do not see any option to download a different controller???

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [September 18, 2026, 4:31pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/6 "2026-09-18T16:31:27Z")

</div>

Post up a screenshot of this.

---

<div class="post-metadata">

**Author:** ![BargerKona](https://avatars.discourse-cdn.com/v4/letter/b/ecae2f/32.png) [@BargerKona](https://forum.onefinitycnc.com/u/BargerKona)\
**Post date:** [September 18, 2026, 4:56pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/7 "2026-09-18T16:56:13Z")

</div>

![IMG_1990](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/5/15793a03a19a066ad594b8c4da4774b70f6b11d4.jpeg)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [September 18, 2026, 5:02pm UTC](https://forum.onefinitycnc.com/t/new-elite-woodworker-using-buildbotics-controller/40213/8 "2026-09-18T17:02:52Z")

</div>

Thanks for that!  
Vectric labled the controller mistakenly. We’ll contact them.

Hit apply. THe post processor are correct for redline/realtime.