# New project. Tree frames **URL:** \ **Category:** Gallery\ **Created:** [January 7, 2021, 8:31pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646 "2021-01-07T20:31:12Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![ekobesy](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@ekobesy](https://forum.onefinitycnc.com/u/ekobesy)\ **Post date:** [January 7, 2021, 8:31pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/1 "2021-01-07T20:31:12Z")
3rd project on red oak, I am still very impressed with the Onefinity and I am glad I made the investment. Couple of things would make it even more perfect is adjustable feed speed and pause that actually works. Back to the project, the frames will be separated and I will either do a laser outlay on the tree or two tones stain. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/e/e0bd947037e9dc03016f9defd6c329b192c19788.jpeg) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/9/96ad04ea37e148a71e0006a20c58407f2525ea71.jpeg) ---
**Author:** ![gad5264](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/gad5264/32/701_2.png) [@gad5264](https://forum.onefinitycnc.com/u/gad5264)\ **Post date:** [January 7, 2021, 9:27pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/2 "2021-01-07T21:27:55Z")
Amazing looking piece Sam. How long did this take to carve and what size TBN did you use? ---
**Author:** ![ekobesy](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@ekobesy](https://forum.onefinitycnc.com/u/ekobesy)\ **Post date:** [January 7, 2021, 10:02pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/3 "2021-01-07T22:02:39Z")
Thanks Grant It’s 23” x 16” x 075” red oak piece. The bit was actually a 0.25 ball nose running on 10% step over. Total time was 6 hours, ET with a TBN was over 20 hours and I didn’t feel the need to invest that much time on it 😀 ---
**Author:** ![rblur01](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@rblur01](https://forum.onefinitycnc.com/u/rblur01)\ **Post date:** [January 7, 2021, 10:52pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/4 "2021-01-07T22:52:09Z")
What feed rates did you use on this project? I always felt like i couldn’t find the sweet spot on my old cncrouter with ball nose endmills. ---
**Author:** ![ekobesy](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@ekobesy](https://forum.onefinitycnc.com/u/ekobesy)\ **Post date:** [January 8, 2021, 12:12pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/5 "2021-01-08T12:12:52Z")
For this and being Oak I went with feed rate 50” and plunge 30” ---
**Author:** ![rblur01](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@rblur01](https://forum.onefinitycnc.com/u/rblur01)\ **Post date:** [January 8, 2021, 4:01pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/6 "2021-01-08T16:01:01Z")
Thanks I’ll have to try those on my next project ---
**Author:** ![Laserlarry](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/laserlarry/32/470_2.png) [@Laserlarry](https://forum.onefinitycnc.com/u/Laserlarry)\ **Post date:** [January 8, 2021, 6:04pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/7 "2021-01-08T18:04:31Z")
Thanks for the feed rate Sam, but could you please share the RPM’S also. Your project is awesome. ---
**Author:** ![GregoryG](https://avatars.discourse-cdn.com/v4/letter/g/97f17d/32.png) [@GregoryG](https://forum.onefinitycnc.com/u/GregoryG)\ **Post date:** [January 9, 2021, 3:02am UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/8 "2021-01-09T03:02:52Z")
Nice how are you separating panel Onefinity or table saw Was there much sanding needed Or what bit did you use Once again nice ty ---
**Author:** ![ekobesy](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@ekobesy](https://forum.onefinitycnc.com/u/ekobesy)\ **Post date:** [January 9, 2021, 12:59pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/9 "2021-01-09T12:59:16Z")
Thanks, it was between 2 and 3 on the Makita ---
**Author:** ![ekobesy](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@ekobesy](https://forum.onefinitycnc.com/u/ekobesy)\ **Post date:** [January 9, 2021, 1:01pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/10 "2021-01-09T13:01:55Z")
Thanks, Table saw but I need to do the laser overlay first. No sanding needed IMO although I might give it a quick polish with steel wool. ---
**Author:** ![ekobesy](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@ekobesy](https://forum.onefinitycnc.com/u/ekobesy)\ **Post date:** [January 12, 2021, 5:49pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/11 "2021-01-12T17:49:30Z")
Final product, at least for now. I will make a matching oak frame once I have time. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/e/e5d98305518e848ad1b7276e0ddab3ef7aa276a0.jpeg) ---
**Author:** ![gad5264](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/gad5264/32/701_2.png) [@gad5264](https://forum.onefinitycnc.com/u/gad5264)\ **Post date:** [January 12, 2021, 6:09pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/12 "2021-01-12T18:09:59Z")
WOW Sam, this turned out awesome with finish on it. ---
**Author:** ![ekobesy](https://avatars.discourse-cdn.com/v4/letter/e/a9a28c/32.png) [@ekobesy](https://forum.onefinitycnc.com/u/ekobesy)\ **Post date:** [January 12, 2021, 8:41pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/13 "2021-01-12T20:41:13Z")
Thanks Grant. It was a fun project. ---
**Author:** ![Laserlarry](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/laserlarry/32/470_2.png) [@Laserlarry](https://forum.onefinitycnc.com/u/Laserlarry)\ **Post date:** [January 13, 2021, 5:58pm UTC](https://forum.onefinitycnc.com/t/new-project-tree-frames/2646/14 "2021-01-13T17:58:33Z")
You should be really proud of that. Great job. Thanks for sharing it with us.