# New Toy for the Tyke

**URL:** <https://forum.onefinitycnc.com/t/new-toy-for-the-tyke/28970>\
**Category:** Finished Projects\
**Created:** [October 14, 2024, 7:03pm UTC](https://forum.onefinitycnc.com/t/new-toy-for-the-tyke/28970 "2024-10-14T19:03:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SailorMike](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sailormike/32/3290_2.png) [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\
**Post date:** [October 14, 2024, 7:03pm UTC](https://forum.onefinitycnc.com/t/new-toy-for-the-tyke/28970/1 "2024-10-14T19:03:10Z")

</div>

I just finished this toy for the grandchild of a friend. I’ve been doing CNC for a while, but it still amazes me that all the holes in the shapes line up perfectly with the pegs! Using VCarve, I laid the whole thing out on a master sheet, then created copies of the board and the shapes to their own sheets. Using a negative offset with the pocket feature, I didn’t have to go through and resize the holes, all set to .75 in diameter. I used -.010 in offset for the pockets in the board (hammer fit) and -.0625 in offset for the holes in all the shapes, so little fingers can just drop them onto the pegs.

![toy_1](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/0/504d7a54f4e50b1495e24b0071732bc52e1470c3.jpeg)  
 ![toy_2](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/4/e40dcd737077bb03ca3c1922f6ad0851879d9c7f.jpeg)

---

<div class="post-metadata">

**Author:** ![GrimResistance](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/grimresistance/32/7198_2.png) [@GrimResistance](https://forum.onefinitycnc.com/u/GrimResistance)\
**Post date:** [December 24, 2024, 3:43pm UTC](https://forum.onefinitycnc.com/t/new-toy-for-the-tyke/28970/2 "2024-12-24T15:43:21Z")

</div>

The rectangular blocks go on… the square pegs!

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 12, 2026, 11:47pm UTC](https://forum.onefinitycnc.com/t/new-toy-for-the-tyke/28970/3 "2026-03-12T23:47:24Z")

</div>

Offsets for the win! Looks great!