# Newbie - question

**URL:** <https://forum.onefinitycnc.com/t/newbie-question/11853>\
**Category:** CAD (General)\
**Created:** [March 14, 2022, 12:00am UTC](https://forum.onefinitycnc.com/t/newbie-question/11853 "2022-03-14T00:00:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![stmcdavis](https://avatars.discourse-cdn.com/v4/letter/s/b4bc9f/32.png) [@stmcdavis](https://forum.onefinitycnc.com/u/stmcdavis)\
**Post date:** [March 14, 2022, 12:00am UTC](https://forum.onefinitycnc.com/t/newbie-question/11853/1 "2022-03-14T00:00:27Z")

</div>

Using Carbide Create for now to learn. Onefinity Woodworker X50.

Created a new design, and think I have the toolpath correct. I homed the machine, then set the zeros using my probe. The display shows the zeros. Then hit play. Instead of starting the cut, the router lifts all the way to the top and the controller requests a tool change and for me to hook up the probe again as if I am changing tools. I have only one bit selected in the design. Any help appreciated. Thanks

---

<div class="post-metadata">

**Author:** ![stmcdavis](https://avatars.discourse-cdn.com/v4/letter/s/b4bc9f/32.png) [@stmcdavis](https://forum.onefinitycnc.com/u/stmcdavis)\
**Post date:** [March 14, 2022, 3:12pm UTC](https://forum.onefinitycnc.com/t/newbie-question/11853/2 "2022-03-14T15:12:44Z")

</div>

Solved. Carbide Create had defaulted to a shapeoko specific g-code. Changed to GRBL and all is well.