# Not finished painting but, getting close

**URL:** <https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468>\
**Category:** Finished Projects\
**Created:** [November 21, 2024, 10:02pm UTC](https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468 "2024-11-21T22:02:16Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mick427](https://avatars.discourse-cdn.com/v4/letter/m/ce7236/32.png) [@Mick427](https://forum.onefinitycnc.com/u/Mick427)\
**Post date:** [November 21, 2024, 10:02pm UTC](https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468/1 "2024-11-21T22:02:16Z")

</div>

Onefinity carved this extremely fast, flat bottom .125. It’s 25 inches in diameter. Will be for a 7 year old. I will add his name at the bottom and picture frame it to appear like a movie poster.

 ![9F65436E-7779-42F8-8BCB-8A54D28FE10C](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/8/381136825cb421416ec7b0e36599cfbb0d2d1f44.jpeg)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 21, 2024, 10:16pm UTC](https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468/2 "2024-11-21T22:16:24Z")

</div>

Looks great! what time did it take?

---

<div class="post-metadata">

**Author:** ![Mick427](https://avatars.discourse-cdn.com/v4/letter/m/ce7236/32.png) [@Mick427](https://forum.onefinitycnc.com/u/Mick427)\
**Post date:** [November 21, 2024, 10:31pm UTC](https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468/3 "2024-11-21T22:31:24Z")

</div>

25 min. Now painting that’s another story 😉

---

<div class="post-metadata">

**Author:** ![apidocumentationplox](https://avatars.discourse-cdn.com/v4/letter/a/a587f6/32.png) [@apidocumentationplox](https://forum.onefinitycnc.com/u/apidocumentationplox)\
**Post date:** [November 21, 2024, 11:40pm UTC](https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468/4 "2024-11-21T23:40:51Z")

</div>

That’s gonna be one stoked 7-year-old!

---

<div class="post-metadata">

**Author:** ![ScottS](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@ScottS](https://forum.onefinitycnc.com/u/ScottS)\
**Post date:** [November 22, 2024, 12:01am UTC](https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468/5 "2024-11-22T00:01:11Z")

</div>

Very nice work for the kiddos.

---

<div class="post-metadata">

**Author:** ![Mick427](https://avatars.discourse-cdn.com/v4/letter/m/ce7236/32.png) [@Mick427](https://forum.onefinitycnc.com/u/Mick427)\
**Post date:** [November 22, 2024, 4:18am UTC](https://forum.onefinitycnc.com/t/not-finished-painting-but-getting-close/29468/6 "2024-11-22T04:18:30Z")

</div>

I actually had to do two…Twins!!!