# Onefinity Controller Stopping Mid-Program (solved: EMI / Static Build up)

**URL:** <https://forum.onefinitycnc.com/t/onefinity-controller-stopping-mid-program-solved-emi-static-build-up/9041>\
**Category:** Controller (Buildbotics) Discussion\
**Created:** [November 20, 2021, 7:39pm UTC](https://forum.onefinitycnc.com/t/onefinity-controller-stopping-mid-program-solved-emi-static-build-up/9041 "2021-11-20T19:39:44Z")\
**Posts on this page:** 1\
**Showing post:** 28

<div class="post-metadata">

**Author:** ![TheyCallMeJohn](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/theycallmejohn/32/7657_2.png) [@TheyCallMeJohn](https://forum.onefinitycnc.com/u/TheyCallMeJohn)\
**Post date:** [January 14, 2022, 5:56am UTC](https://forum.onefinitycnc.com/t/onefinity-controller-stopping-mid-program-solved-emi-static-build-up/9041/28 "2022-01-14T05:56:00Z")

</div>

I am not that patient. I opted for the good ole blue tape method but here is what I found.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/7/7281a7a42eea3e71ac1001e81f223da94f0c309a.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/onefinity-controller-stopping-mid-program-solved-emi-static-build-up/9041)._