# Onefinity Drag Chain

**URL:** <https://forum.onefinitycnc.com/t/onefinity-drag-chain/30111>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [December 24, 2024, 8:45pm UTC](https://forum.onefinitycnc.com/t/onefinity-drag-chain/30111 "2024-12-24T20:45:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![charlesk](https://avatars.discourse-cdn.com/v4/letter/c/3ab097/32.png) [@charlesk](https://forum.onefinitycnc.com/u/charlesk)\
**Post date:** [December 24, 2024, 8:45pm UTC](https://forum.onefinitycnc.com/t/onefinity-drag-chain/30111/1 "2024-12-24T20:45:19Z")

</div>

Just installed onefinty drag chain assly on my X35  
On the front of the Y rail when finished installing the chain there is two connectors X1 and Y1 to be connected by some means to go to the computer  
Nothing came with the drag chain so what am I supposed to use to connect to the X1 and Y1 at the Y rail to the computer  
Kinda left out to dry here  
Would think connection cable would have come with the chain assly.  
Not impressed  
any help would be greatly appreciated  
Charlie

---

<div class="post-metadata">

**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\
**Post date:** [December 24, 2024, 9:00pm UTC](https://forum.onefinitycnc.com/t/onefinity-drag-chain/30111/2 "2024-12-24T21:00:16Z")

</div>

Did it come complete with the components shown and explained here…

[https://www.youtube.com/watch?v=B7gkKGBFUEM](https://www.youtube.com/watch?v=B7gkKGBFUEM)

---

<div class="post-metadata">

**Author:** ![charlesk](https://avatars.discourse-cdn.com/v4/letter/c/3ab097/32.png) [@charlesk](https://forum.onefinitycnc.com/u/charlesk)\
**Post date:** [December 25, 2024, 3:31pm UTC](https://forum.onefinitycnc.com/t/onefinity-drag-chain/30111/3 "2024-12-25T15:31:57Z")

</div>

My setup is very similar to the video but did not get the cable cover for the Z cable no big deal what I think I should have got is the cabling that connects to the wiring connectors at the end of the Y rail that go from there to the computer. I can use the the old cable that was taken off it will work till I can source the correct cabling. Onefinity is closed till Jan 6/25
