# Onefinity Elite CNC (Masso) | How to trigger the router and vacuum relay power ports automatically (FAQ)

**URL:** <https://forum.onefinitycnc.com/t/onefinity-elite-cnc-masso-how-to-trigger-the-router-and-vacuum-relay-power-ports-automatically-faq/21757>\
**Category:** Official 1F Elite (Gen 1) (MASSO) FAQs\
**Created:** [August 4, 2023, 10:26pm UTC](https://forum.onefinitycnc.com/t/onefinity-elite-cnc-masso-how-to-trigger-the-router-and-vacuum-relay-power-ports-automatically-faq/21757 "2023-08-04T22:26:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [August 4, 2023, 10:26pm UTC](https://forum.onefinitycnc.com/t/onefinity-elite-cnc-masso-how-to-trigger-the-router-and-vacuum-relay-power-ports-automatically-faq/21757/1 "2023-08-04T22:26:01Z")

</div>

In this video, Stone walks through how to use the Onefinity Elite series router and vacuum relays. He shows to to manually turn them on and off an automated them as well with Gcode programming.

Notes:  
The VAC port is for 12amp or lowers vacuums.  
The ROUTER port if for the Makita (or similar) routers. DO NOT PLUG IN A VFD/SPINDLE INTO THIS PORT! VFDs MUST be plugged into wall power.

GCODE:  
ROUTER port enable: M3  
VAC port enable: M8  
TURN OFF: M9

BUTTONS:  
(tap once to turn on, tap again to turn off)  
ROUTER : Spindle CC  
VAC: Coolant Flood

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/a/4a4f13290abee453b6e037c0df9b9aaba0ad7d8a.jpeg "Onefinity Elite CNC (Masso) | How to trigger the router and vacuum relay power ports automatically.") ](https://www.youtube.com/watch?v=ZOKcmmOO3gQ)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 13, 2023, 2:03pm UTC](https://forum.onefinitycnc.com/t/onefinity-elite-cnc-masso-how-to-trigger-the-router-and-vacuum-relay-power-ports-automatically-faq/21757/2 "2023-11-13T14:03:41Z")

</div>

Closed on November 13, 2023, 2:03pm UTC