# Onefinity Elite Series ft Masso. Speed and Depth Test #1. Actual speed

**URL:** <https://forum.onefinitycnc.com/t/onefinity-elite-series-ft-masso-speed-and-depth-test-1-actual-speed/18102>\
**Category:** Controller (MASSO) Discussion\
**Created:** [January 13, 2023, 6:55pm UTC](https://forum.onefinitycnc.com/t/onefinity-elite-series-ft-masso-speed-and-depth-test-1-actual-speed/18102 "2023-01-13T18:55:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MyersWoodshop](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/myerswoodshop/32/27_2.png) [@MyersWoodshop](https://forum.onefinitycnc.com/u/MyersWoodshop)\
**Post date:** [January 13, 2023, 6:55pm UTC](https://forum.onefinitycnc.com/t/onefinity-elite-series-ft-masso-speed-and-depth-test-1-actual-speed/18102/1 "2023-01-13T18:55:10Z")

</div>

Skip to :50 for the good stuff!  
#onefinitycnc #cnc #needforspeed

This is a proof of concept cut test.

Specs:  
Pressure Treated Pine  
250IPM  
.20 step over  
.5 depth of cut  
1/4 upcut from china  
Ramping to start the cut.

Imagine what you could do with a spindle! (yes, I will upgrade to a spindle in the future. If the Makita can do this, and spindle can do SO much more!)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/1/e12c43cb7f39b31b89977ec069cf0a52ec0b58a3.jpeg "Onefinity Elite Series ft Masso. Speed and Depth Test #1. Actual speed.") ](https://www.youtube.com/watch?v=Auw2q-e0D9E)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 13, 2023, 10:30pm UTC](https://forum.onefinitycnc.com/t/onefinity-elite-series-ft-masso-speed-and-depth-test-1-actual-speed/18102/2 "2023-01-13T22:30:37Z")

</div>

Great video! Impressive results for starting out!

---

<div class="post-metadata">

**Author:** ![RexH](https://avatars.discourse-cdn.com/v4/letter/r/c37758/32.png) [@RexH](https://forum.onefinitycnc.com/u/RexH)\
**Post date:** [January 16, 2023, 1:11am UTC](https://forum.onefinitycnc.com/t/onefinity-elite-series-ft-masso-speed-and-depth-test-1-actual-speed/18102/3 "2023-01-16T01:11:20Z")

</div>

I’m surprised the router bit didn’t slide in the collet. When I’ve made aggressive cuts much less aggressive than that the vibrations caused the bit to slip down and then either cut into my spoil board or break the bit