# Onefinity interface question

**URL:** <https://forum.onefinitycnc.com/t/onefinity-interface-question/6179>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [June 16, 2021, 11:59am UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179 "2021-06-16T11:59:02Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![rockytoptim](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rockytoptim/32/3016_2.png) [@rockytoptim](https://forum.onefinitycnc.com/u/rockytoptim)\
**Post date:** [June 16, 2021, 11:59am UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179/1 "2021-06-16T11:59:02Z")

</div>

Why doesn’t the onefinity have the wire frame gcode visable on the 10.8" monitor. I can see it when i load the interface via IP address on my computer. See screenshot below with blue arrow. This is missing on the monitor attached to the controller.

 ![Interface](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/c/3/c3cc60a12c70625f976590344f23a0c2ce38e405.jpeg)

---

<div class="post-metadata">

**Author:** ![pootaholic](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@pootaholic](https://forum.onefinitycnc.com/u/pootaholic)\
**Post date:** [June 16, 2021, 12:10pm UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179/2 "2021-06-16T12:10:06Z")

</div>

Limitation of the RPI in the controller.

> [@Preview of toolpath on touch screen](https://forum.onefinitycnc.com/t/preview-of-toolpath-on-touch-screen/1308):
>
> This is really a minor issue that I was overlooking on the touch screen until I saw the toolpath preview on my phone once I got the WiFi working. I am not seeing the preview on any toolpath on my touch screen and I do not know which setting needs to be set properly. Does any one out there how to show the preview? Thanks in advance

---

<div class="post-metadata">

**Author:** ![rockytoptim](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rockytoptim/32/3016_2.png) [@rockytoptim](https://forum.onefinitycnc.com/u/rockytoptim)\
**Post date:** [June 16, 2021, 12:15pm UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179/3 "2021-06-16T12:15:54Z")

</div>

Thanks for the link to the answer Dave.

---

<div class="post-metadata">

**Author:** ![Bruceiwish](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bruceiwish/32/36407_2.png) [@Bruceiwish](https://forum.onefinitycnc.com/u/Bruceiwish)\
**Post date:** [June 16, 2021, 10:21pm UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179/4 "2021-06-16T22:21:40Z")

</div>

Did you get an answer to this.

---

<div class="post-metadata">

**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\
**Post date:** [June 16, 2021, 11:32pm UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179/5 "2021-06-16T23:32:30Z")

</div>

Check the link Dave posted

---

<div class="post-metadata">

**Author:** ![Bruceiwish](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bruceiwish/32/36407_2.png) [@Bruceiwish](https://forum.onefinitycnc.com/u/Bruceiwish)\
**Post date:** [June 17, 2021, 6:10am UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179/6 "2021-06-17T06:10:29Z")

</div>

Wheres the link ?  
Would live to find how to watch visual on phone, googled it and nothing comes up

---

<div class="post-metadata">

**Author:** ![pootaholic](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@pootaholic](https://forum.onefinitycnc.com/u/pootaholic)\
**Post date:** [June 17, 2021, 6:29am UTC](https://forum.onefinitycnc.com/t/onefinity-interface-question/6179/8 "2021-06-17T06:29:20Z")

</div>

> [@Preview of toolpath on touch screen](https://forum.onefinitycnc.com/t/preview-of-toolpath-on-touch-screen/1308):
>
> This is really a minor issue that I was overlooking on the touch screen until I saw the toolpath preview on my phone once I got the WiFi working. I am not seeing the preview on any toolpath on my touch screen and I do not know which setting needs to be set properly. Does any one out there how to show the preview? Thanks in advance
