# Onefinity Riser Blocks **URL:** \ **Category:** Accessories\ **Created:** [September 9, 2021, 7:49pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641 "2021-09-09T19:49:39Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![RowdyRoman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rowdyroman/32/14_2.png) [@RowdyRoman](https://forum.onefinitycnc.com/u/RowdyRoman)\ **Post date:** [September 9, 2021, 7:49pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/1 "2021-09-09T19:49:39Z")
Riser Blocks are on sale!!! Check out the YouTube Video: [![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/8/1819d672de5103b9ebc2648cc40480a3ab9a2643.jpeg "Jack Up Your Onefinity with Riser Blocks") ](https://www.youtube.com/watch?v=0WGof91JCUQ) Product Listing: [Riser Blocks - Etsy](https://www.etsy.com/RowdyRoman/listing/1068083456/riser-blocks?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1631216947937) ---
**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\ **Post date:** [September 9, 2021, 9:59pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/2 "2021-09-09T21:59:32Z")
Great idea Rowdy!!! Thanks for including the 3DP file on Etsy as well. Keep up the great innovation! -Alex ---
**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\ **Post date:** [September 12, 2021, 10:46pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/3 "2021-09-12T22:46:57Z")
This sure deserves a “bump” and another look…! 👍 ---
**Author:** ![Gigglybert](https://avatars.discourse-cdn.com/v4/letter/g/c0e974/32.png) [@Gigglybert](https://forum.onefinitycnc.com/u/Gigglybert)\ **Post date:** [September 15, 2021, 11:57pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/4 "2021-09-15T23:57:17Z")
Is this meant to be permanent or only when you need to work on a big piece. ---
**Author:** ![RowdyRoman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rowdyroman/32/14_2.png) [@RowdyRoman](https://forum.onefinitycnc.com/u/RowdyRoman)\ **Post date:** [September 16, 2021, 12:19am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/5 "2021-09-16T00:19:52Z")
@Gigglybert I was originally thinking as needed but this is @Bear original idea and he uses them for deep boxes. ---
**Author:** ![rblur01](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@rblur01](https://forum.onefinitycnc.com/u/rblur01)\ **Post date:** [September 16, 2021, 8:25pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/6 "2021-09-16T20:25:51Z")
Got mine in today. I got them thinking it’ll be good to use with my 65mm spindle since it’s a lot taller than the router and it’ll give me more room for material since the spindle can’t go up as high because of the stepper motor. Just put them on my onefinity and it looks good ---
**Author:** ![RowdyRoman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rowdyroman/32/14_2.png) [@RowdyRoman](https://forum.onefinitycnc.com/u/RowdyRoman)\ **Post date:** [September 16, 2021, 8:38pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/7 "2021-09-16T20:38:32Z")
@rblur01 Awesome!! I printed them to be stout! Out of curiosity what were thoughts as far quality? I know they are not metal but your thoughts would be appreciated!! ---
**Author:** ![rblur01](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@rblur01](https://forum.onefinitycnc.com/u/rblur01)\ **Post date:** [September 16, 2021, 9:09pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/8 "2021-09-16T21:09:07Z")
I think they are great especially for 3d printed parts. I think they should work fine for me. When I do some tougher carving I’ll have a better idea on the strength but again I think they will be fine for me. If nothing else later on I could use them as a template to make some out of metal if need be. But I like them for sure. ---
**Author:** ![kodiak31](https://avatars.discourse-cdn.com/v4/letter/k/90db22/32.png) [@kodiak31](https://forum.onefinitycnc.com/u/kodiak31)\ **Post date:** [September 17, 2021, 1:17am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/9 "2021-09-17T01:17:46Z")
I would be interested in this if they were aluminum ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [September 17, 2021, 1:27am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/10 "2021-09-17T01:27:57Z")
I am not sure what infill percentage is being used, but perhaps a custom order is possible with higher infill. Personally I have found the fully solid parts I have printed for myself using PLA+ to be surprisingly strong, and given the way the blocks are used and fastened there may not be much advantage to using aluminum. ---
**Author:** ![kodiak31](https://avatars.discourse-cdn.com/v4/letter/k/90db22/32.png) [@kodiak31](https://forum.onefinitycnc.com/u/kodiak31)\ **Post date:** [September 17, 2021, 1:58am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/11 "2021-09-17T01:58:44Z")
probably not, but it is a mind over matter issue for me - durability, etc. I would rather pay for the long term vs. risking issues on the short term… I know, I am sounding like an old fart now… ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [September 17, 2021, 2:31am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/12 "2021-09-17T02:31:59Z")
Truth be told that is my instinct as well in almost all of my purchases. Perhaps you will machine your own at some point from aluminum block. ---
**Author:** ![Vancouvercraig](https://avatars.discourse-cdn.com/v4/letter/v/8491ac/32.png) [@Vancouvercraig](https://forum.onefinitycnc.com/u/Vancouvercraig)\ **Post date:** [September 17, 2021, 9:03pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/13 "2021-09-17T21:03:49Z")
Is there anyway we can get a dimensional print to machine from aluminum? ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [September 17, 2021, 9:13pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/14 "2021-09-17T21:13:27Z")
You would need to ask the owner of the design. ---
**Author:** ![RowdyRoman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rowdyroman/32/14_2.png) [@RowdyRoman](https://forum.onefinitycnc.com/u/RowdyRoman)\ **Post date:** [September 17, 2021, 9:21pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/15 "2021-09-17T21:21:56Z")
@Vancouvercraig here is a link to the stl file. You can import it into your cnc software > **[Riser Blocks Digital File - Etsy](https://www.etsy.com/listing/1082028373/riser-blocks-digital-file)** > > This Tools item by RowdyRoman has 20 favorites from Etsy shoppers. Ships from United States. Listed on Oct 9, 2022 ---
**Author:** ![cyberreefguru](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/cyberreefguru/32/27385_2.png) [@cyberreefguru](https://forum.onefinitycnc.com/u/cyberreefguru)\ **Post date:** [September 18, 2021, 3:55pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/16 "2021-09-18T15:55:03Z")
You can purchase the STL from the store, import into Fusion and do the CAM work from there. Or convert to a solid and edit as required. -Tom ---
**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\ **Post date:** [September 26, 2021, 8:12pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/17 "2021-09-26T20:12:27Z")
Well, look what arrived on Friday! Riser Blocks and a Controller Holster! Nice work Peter… Thanks! 👍 ![20210924_174803](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/c/9/c925385dadfef5d0049a7a9c3e4a3c2311b0e724.jpeg) ---
**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\ **Post date:** [September 26, 2021, 10:52pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/18 "2021-09-26T22:52:28Z")
Out with the old (wood blocks)… and in with the new Riser Blocks… ![20210926_180524](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/0/10e93c2daad61e8ca6383a1f287b4af40ebd9c1b.jpeg) ![20210926_180641](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/8/831a5b3d86d7257cebefbd4c52973b5a835cd917.jpeg) ![20210926_181003](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/6/66a192c1bb0dacd798cf07a853cb6f18c73311f7.jpeg) ![20210926_182541](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/2/2e9024d3c9d61e23f4656e874ab985ccfe1b3ec3.jpeg) ![20210926_182819](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/4/4796db61d22d88c707ff19366432264689fb0107.jpeg) ![20210926_182908](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/e/6ede93c3bc30b18c39e447b69453f116c6a9e697.jpeg) Time to clear out a 3" x 12" solid chunk of Maple… Should be fun!!! 😜 ---
**Author:** ![ben](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ben/32/1298_2.png) [@ben](https://forum.onefinitycnc.com/u/ben)\ **Post date:** [September 27, 2021, 6:00am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/19 "2021-09-27T06:00:07Z")
Do you see a difference in stability compared to the wood blocks? ---
**Author:** ![Bear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bear/32/30015_2.png) [@Bear](https://forum.onefinitycnc.com/u/Bear)\ **Post date:** [September 28, 2021, 1:22am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/20 "2021-09-28T01:22:26Z")
@ben I made the wood blocks because there was nothing else out there to do what I was doing… and I never had an issue with stability or flex. After talking to Peter to see if he could make them, he was nice enough to oblige (Peter, you rock!). He made a great product that is very easy to install, and the fit and finish it perfect for me! I get the “usual” comments about making these out of metal, BUT… in practice… I personally believe this is completely unfounded and hyperbole. (No offense to those who live in a theoretical realm). In practice, these riser blocks work without any discernible side effects at all! If you need the extra height to do whatever it is you do with the Onefinity… give Peter a look, and I’m sure he will hook you up with a great product! [Next page](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641.md?page=2)