# Onefinity Riser Blocks

**URL:** <https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641>\
**Category:** Accessories\
**Created:** [September 9, 2021, 7:49pm UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641 "2021-09-09T19:49:39Z")\
**Posts on this page:** 1\
**Showing post:** 45

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [May 29, 2023, 4:34am UTC](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641/45 "2023-05-29T04:34:26Z")

</div>

Hey Chris,

> [@ChrisS](#):
>
> And yes i did put it on the y feet.

I realize I can see that [in your image from the other post now.](https://forum.onefinitycnc.com/t/elite-foreman-spoil-board-location/20773/11)

My plan is not to use a table top at all, but to weld a U-shaped base from steel profiles that holds each Y axis at its sides and has a space in between for things like rotary axis or higher workpieces, and a system of height-adjustable wasteboard/machine beds.

> [@ChrisS](#):
>
> Putting pieces of plywood on the y would have resulted in the same thing as raising the x except i also have clearance where the x blocks are because it’s like 1/8" on the foreman, but without compromising the CG at the x

_That_ was not understable to me. What?

---

_[View the full topic](https://forum.onefinitycnc.com/t/onefinity-riser-blocks/7641)._