# OneFinity Upgrade Question

**URL:** <https://forum.onefinitycnc.com/t/onefinity-upgrade-question/10208>\
**Category:** Uncategorized\
**Created:** [January 10, 2022, 3:02am UTC](https://forum.onefinitycnc.com/t/onefinity-upgrade-question/10208 "2022-01-10T03:02:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Martin](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@Martin](https://forum.onefinitycnc.com/u/Martin)\
**Post date:** [January 10, 2022, 3:02am UTC](https://forum.onefinitycnc.com/t/onefinity-upgrade-question/10208/1 "2022-01-10T03:02:28Z")

</div>

I am upgrading to a 80mm spindle, so I need to upgrade the X-axis as well or will the original setup work?

---

<div class="post-metadata">

**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\
**Post date:** [January 10, 2022, 4:12am UTC](https://forum.onefinitycnc.com/t/onefinity-upgrade-question/10208/2 "2022-01-10T04:12:01Z")

</div>

From following the forum for quite some time, most are using 80mm spindles successfully on the stock X axes of Machinist and Woodworker. Some are upgrading to the X50 versions stating they are more rigid, although my request for quantitative evidence/data supporting this has yet to be answered.

I have an original Woodworker, and will be receiving my new spindle in about a month - I will let you know the results.

---

<div class="post-metadata">

**Author:** ![Martin](https://avatars.discourse-cdn.com/v4/letter/m/73ab20/32.png) [@Martin](https://forum.onefinitycnc.com/u/Martin)\
**Post date:** [January 10, 2022, 7:51pm UTC](https://forum.onefinitycnc.com/t/onefinity-upgrade-question/10208/3 "2022-01-10T19:51:56Z")

</div>

I don’t mind upgrading if it is needed and helps with the quality of what I am doing.

Thanks