# Onefinity Woodworker MAC Address

**URL:** <https://forum.onefinitycnc.com/t/onefinity-woodworker-mac-address/7378>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [August 24, 2021, 9:27pm UTC](https://forum.onefinitycnc.com/t/onefinity-woodworker-mac-address/7378 "2021-08-24T21:27:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://forum.onefinitycnc.com/u/Larry)\
**Post date:** [August 24, 2021, 9:27pm UTC](https://forum.onefinitycnc.com/t/onefinity-woodworker-mac-address/7378/1 "2021-08-24T21:27:13Z")

</div>

I’m using the Device MAC address(s) to limit access to my TPlink 5G Router and I need to locate the MAC  
address of the Onefinity Controller. How do I locate the MAC address? I can see the IP address on the HDMI  
Display but haven’t found the MAC Address.

Just need to update the Firmware and Tram the Z axis and I’ll be ready to do a bit of testing.

Larry

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [August 24, 2021, 10:00pm UTC](https://forum.onefinitycnc.com/t/onefinity-woodworker-mac-address/7378/2 "2021-08-24T22:00:15Z")

</div>

the onefinity will not display a mac address, only the ip address.

---

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://forum.onefinitycnc.com/u/Larry)\
**Post date:** [August 24, 2021, 10:37pm UTC](https://forum.onefinitycnc.com/t/onefinity-woodworker-mac-address/7378/3 "2021-08-24T22:37:55Z")

</div>

Yes, I understand that. But, I’ve now moved the Controller and Display real close to my TPLINK 5G Router.  
I’ve connected the Controller by a 2.4G Wifi Link and I can see the connection in my TPLINK Router.  
MAC Address is B8:27:xx:yy:99:05. So, I now have the MAC Address and my Router is OPEN. But I can’t update to Version 1.08 Firmware. Is there some Permissions problem preventing me from updating via Wifi?

Has anyone else been able to update via Wifi?

Larry

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [August 25, 2021, 4:10pm UTC](https://forum.onefinitycnc.com/t/onefinity-woodworker-mac-address/7378/4 "2021-08-25T16:10:21Z")

</div>

this is 100% something on your routers/modem side. No configurations can or should be made with the onefinity controller other than entering your ssid and password

---

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://forum.onefinitycnc.com/u/Larry)\
**Post date:** [August 25, 2021, 7:36pm UTC](https://forum.onefinitycnc.com/t/onefinity-woodworker-mac-address/7378/5 "2021-08-25T19:36:17Z")

</div>

A direct Ethernet connection to my Router worked, while Wifi wouldn’t. Maybe this will help others get updated.

Larry
