# Opt lasers or Jtech

**URL:** <https://forum.onefinitycnc.com/t/opt-lasers-or-jtech/8991>\
**Category:** J Tech Laser\
**Created:** [November 17, 2021, 3:49pm UTC](https://forum.onefinitycnc.com/t/opt-lasers-or-jtech/8991 "2021-11-17T15:49:22Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![ben](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ben/32/1298_2.png) [@ben](https://forum.onefinitycnc.com/u/ben)\
**Post date:** [November 17, 2021, 7:34pm UTC](https://forum.onefinitycnc.com/t/opt-lasers-or-jtech/8991/4 "2021-11-17T19:34:54Z")

</div>

I have the Opt Lasers with µSpot and air assist nozzle and I’m very pleased with it. I published [my first impressions](https://forum.onefinitycnc.com/t/opt-lasers-first-impressions/7544) a while ago. With more experience, what I like:

- material and build quality, mostly metal
- safe: the laser detaches itself and turn itself off it you crash the head in the board. No arm to the laser or… to you!
- air nozzle makes for very clean engraving/cuts, particularly if you place an honeycomb under the board to cut
- they ship from EU, so no problems with VAT/import fees

I have had no problems engraving and, after fine tuning my settings, I can cut 3mm ply in one pass. I use Lightburn and Fusion 360. A [recent project](https://forum.onefinitycnc.com/t/post-up-them-projects/1345/460).

---

_[View the full topic](https://forum.onefinitycnc.com/t/opt-lasers-or-jtech/8991)._
