# Options for Attaching QCW to table? **URL:** \ **Category:** Quick Change Wasteboard Frame\ **Created:** [December 8, 2021, 10:39pm UTC](https://forum.onefinitycnc.com/t/options-for-attaching-qcw-to-table/9424 "2021-12-08T22:39:46Z")\ **Posts on this page:** 4\ **Page:** 2
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [July 9, 2022, 2:24pm UTC](https://forum.onefinitycnc.com/t/options-for-attaching-qcw-to-table/9424/21 "2022-07-09T14:24:34Z")
Hey DrivewayWoodworker, > [@DrivewayWoodworker](#): > > unlike trying to use the female feet inserts. you mean these that come with the [Any Surface Leveling System](https://www.onefinitycnc.com/product-page/any-surface-leveling-system) (and unfortunately not with [QCW Frame](https://www.onefinitycnc.com/product-page/journeyman-qcw-frame-secure-from-above))? > [@How to install QCW leveling feet](https://forum.onefinitycnc.com/t/how-to-install-qcw-leveling-feet/12571/1): > > Step 3: install the connector for the levelling foot inside the rail opening > > ![thumbnail_Step 3](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/0/90a8886a53dd87041ca152fa6adaa060f06569e0.jpeg) You could still access them if you have a circular hole in your torsion box with the diameter of your hex socket. Welcome to the forum! ---
**Author:** ![sam76](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@sam76](https://forum.onefinitycnc.com/u/sam76)\ **Post date:** [July 23, 2022, 9:51pm UTC](https://forum.onefinitycnc.com/t/options-for-attaching-qcw-to-table/9424/22 "2022-07-23T21:51:58Z")
The bolts I got look exactly like this photo, they are not long enough to mount the folding stand. Am I missing something? ---
**Author:** ![camswoodcraft](https://avatars.discourse-cdn.com/v4/letter/c/e99b99/32.png) [@camswoodcraft](https://forum.onefinitycnc.com/u/camswoodcraft)\ **Post date:** [August 12, 2022, 5:44pm UTC](https://forum.onefinitycnc.com/t/options-for-attaching-qcw-to-table/9424/23 "2022-08-12T17:44:25Z")
I’m interested to know if you actually found a answer to this problem, I own the journeyman waste board table and on mine it is tapped from under wet with a built in nut, so I could screw in something from underneath, but he’ll trying to drill from underneath my table to match the holes on that would be next to impossible way to much math, lol, so anyway I’m thinking an L bracket, unless you came up with something else, ---
**Author:** ![camswoodcraft](https://avatars.discourse-cdn.com/v4/letter/c/e99b99/32.png) [@camswoodcraft](https://forum.onefinitycnc.com/u/camswoodcraft)\ **Post date:** [August 12, 2022, 5:45pm UTC](https://forum.onefinitycnc.com/t/options-for-attaching-qcw-to-table/9424/24 "2022-08-12T17:45:26Z")
That’s exactly what I didn’t want to do, but it seems that’s the only anwser [Previous page](https://forum.onefinitycnc.com/t/options-for-attaching-qcw-to-table/9424.md?page=1)