# Other router options other than Makita

**URL:** <https://forum.onefinitycnc.com/t/other-router-options-other-than-makita/25151>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [February 5, 2024, 3:00pm UTC](https://forum.onefinitycnc.com/t/other-router-options-other-than-makita/25151 "2024-02-05T15:00:44Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 5, 2024, 5:07pm UTC](https://forum.onefinitycnc.com/t/other-router-options-other-than-makita/25151/4 "2024-02-05T17:07:06Z")

</div>

Hey Tony,

if they were willing to design something, I think they could (should?) offer a mount for what many consider as → [the best milling motor solution for hobbyists and semiprofessionals](https://forum.onefinitycnc.com/t/introducing-the-new-onefinity-elite-series-powered-by-masso/16706/115#best-milling-motor-solution-for-hobbyists-and-semiprofessionals-1) for the Onefinity.

What I am talking about is the milling motor type that is widespread around the world, a motor **dedicated for 24/7 CNC use** (and that does not loose its warranty as soon as you mount it into a CNC, as Makita stated for their Makita hand trim router), with **all-steel motor flange** and **double ball bearing** , a control interface for **controlling speed by the CNC controller** via g-code, **run-in by the manufacturer** , but at same time **no VFD** , **no custom wiring** , works **out-of-the-box** , simply **plug-and-play** on a **domestic socket**.

Such a 43 mm “Euro” mount that Onefinity could offer would look like this:

> [@43mm Euro spindle](https://forum.onefinitycnc.com/t/43mm-euro-spindle/15188/28):
>
> ![Pillow block Misumi_iso_back](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/b/b7d8d351eaa3d6a0f47966642de5457e2d68935e.jpeg)

It is a [feature requested](https://forum.onefinitycnc.com/t/offer-a-43mm-spindle-mount-option-for-the-elite-series/19095/1) as of 2023-Feb-28.

---

_[View the full topic](https://forum.onefinitycnc.com/t/other-router-options-other-than-makita/25151)._