# Overall size for Elite Journeyman

**URL:** <https://forum.onefinitycnc.com/t/overall-size-for-elite-journeyman/16924>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [November 29, 2022, 8:27pm UTC](https://forum.onefinitycnc.com/t/overall-size-for-elite-journeyman/16924 "2022-11-29T20:27:56Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [December 28, 2023, 12:51am UTC](https://forum.onefinitycnc.com/t/overall-size-for-elite-journeyman/16924/18 "2023-12-28T00:51:48Z")

</div>

Hey Preston, hey Tim @TheBXwoodworker,

> [@newbiee](#):
>
> My bad, I would imagine the dimensions for the elite journeyman wouldn’t differ much from the regular journeyman.

X-50/PRO Journeyman and Elite Journeyman **have** the same footprint. See

- [Journeyman Dimensions and Table Size](https://forum.onefinitycnc.com/t/cable-and-vac-management-to-start-off/18753/14)

The differences are the protruding stepper size and the protruding drag chains, but if you follow the link to “space to reserve around the machine”, there remains no difference.

---

_[View the full topic](https://forum.onefinitycnc.com/t/overall-size-for-elite-journeyman/16924)._