# Override Control for RPM(Speed) and Feed

**URL:** <https://forum.onefinitycnc.com/t/override-control-for-rpm-speed-and-feed/19066>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [February 26, 2023, 7:20pm UTC](https://forum.onefinitycnc.com/t/override-control-for-rpm-speed-and-feed/19066 "2023-02-26T19:20:22Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 26, 2023, 10:22pm UTC](https://forum.onefinitycnc.com/t/override-control-for-rpm-speed-and-feed/19066/2 "2023-02-26T22:22:54Z")

</div>

Hey Pierre,

you can use the search function.

> [@Feedrate override?](https://forum.onefinitycnc.com/t/feedrate-override/18891/2):
>
> unfortunately feedrate override is not possible with the Onefinity Controller (it is a [feature requested](https://forum.onefinitycnc.com/t/adjustable-feedrate-and-spindle-speed/1014)), but with the Masso G3 Touch of the Elite Series.
> 
> What is possible with some VFDs, is [Temporarily Overriding Spindle Speed](https://forum.onefinitycnc.com/t/hitachi-vfd-connection/7328/29#temporarily-overriding-modbus-control-on-omron-and-hitachi-vfds-1).

---

_[View the full topic](https://forum.onefinitycnc.com/t/override-control-for-rpm-speed-and-feed/19066)._