# Please Help! X Axis Position is less than minimum error **URL:** \ **Category:** Original/PRO Series (Buildbotics) (Gen 1)\ **Created:** [November 1, 2020, 9:05pm UTC](https://forum.onefinitycnc.com/t/please-help-x-axis-position-is-less-than-minimum-error/1494 "2020-11-01T21:05:17Z")\ **Posts on this page:** 1\ **Showing post:** 1
**Author:** ![rbrady](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rbrady/32/34_2.png) [@rbrady](https://forum.onefinitycnc.com/u/rbrady)\ **Post date:** [November 1, 2020, 9:05pm UTC](https://forum.onefinitycnc.com/t/please-help-x-axis-position-is-less-than-minimum-error/1494/1 "2020-11-01T21:05:17Z")
I just set up the new machine and updated the firm ware. I cut a 32.5” x 32.5” MDF spoil board and centered it in the machine, 1” setback from the front of the Y gantry edge. After homing I place the touch probe on the corner of the waste board, center a 1/4 bit a couple of mm over the probe and hit the “Probe XYZ” button. It probes Z, then X, then Y, and then it displays the “X axis position is -4.777 than minimum soft limit.” I’ve tried rebooting the machine, I’ve looked up all of the videos on YouTube and searched the forum here first. I don’t know what to do at this point. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/b/b5e04d5024b13f57d95df7c07a649cde5c57ddfd.jpeg) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/e/3eac2b6ce688ef4c68ed22f987f95fe529ff440e.jpeg) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/9/907d2bd9acce1f2d8a023d7a637212868582839f.jpeg) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/1/109e158666cfe84384d15a7cdd9c97193f4de408.jpeg) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/9/b9f06e8bc17016aa7d9046bbff7e65d195cf218a.jpeg) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/8/82724383a2354a3b2f1215aa337fe6ed50c51cc1.jpeg) --- _[View the full topic](https://forum.onefinitycnc.com/t/please-help-x-axis-position-is-less-than-minimum-error/1494)._