# Post Processor Carvco

**URL:** <https://forum.onefinitycnc.com/t/post-processor-carvco/37910>\
**Category:** Apprentice Series (Gen 2)\
**Created:** [March 17, 2026, 12:37pm UTC](https://forum.onefinitycnc.com/t/post-processor-carvco/37910 "2026-03-17T12:37:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![joshuadeaver](https://avatars.discourse-cdn.com/v4/letter/j/ecccb3/32.png) [@joshuadeaver](https://forum.onefinitycnc.com/u/joshuadeaver)\
**Post date:** [March 17, 2026, 12:37pm UTC](https://forum.onefinitycnc.com/t/post-processor-carvco/37910/1 "2026-03-17T12:37:39Z")

</div>

What post processor will be used for the Apprentice series machine using Carveco? Also what one is needed for Fusion 360?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 17, 2026, 1:41pm UTC](https://forum.onefinitycnc.com/t/post-processor-carvco/37910/2 "2026-03-17T13:41:23Z")

</div>

they are build into the latest carvceo, but here’s the link! [Post Processors - RealTime CNC](https://realtimecnc.com/postp/)