# Post processor for VCarve Desktop

**URL:** <https://forum.onefinitycnc.com/t/post-processor-for-vcarve-desktop/5903>\
**Category:** Uncategorized\
**Created:** [June 3, 2021, 12:13am UTC](https://forum.onefinitycnc.com/t/post-processor-for-vcarve-desktop/5903 "2021-06-03T00:13:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![JDCrafters](https://avatars.discourse-cdn.com/v4/letter/j/c89c15/32.png) [@JDCrafters](https://forum.onefinitycnc.com/u/JDCrafters)\
**Post date:** [June 3, 2021, 12:13am UTC](https://forum.onefinitycnc.com/t/post-processor-for-vcarve-desktop/5903/1 "2021-06-03T00:13:44Z")

</div>

I am very new to all of this and I just bought and downloaded the VCarve Desktop 10.514. I am trying to save a program to surface my waste board and I don’t know how to find the post processor for the Onefinity Woodworker. Can anyone help me?  
Thank you in advance

---

<div class="post-metadata">

**Author:** ![pootaholic](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@pootaholic](https://forum.onefinitycnc.com/u/pootaholic)\
**Post date:** [June 3, 2021, 12:25am UTC](https://forum.onefinitycnc.com/t/post-processor-for-vcarve-desktop/5903/2 "2021-06-03T00:25:49Z")

</div>

> [@Vectric Post Processors For 10.5 or older versions (Download Links Included)](https://forum.onefinitycnc.com/t/vectric-post-processors-download-links-included/640):
>
> 7/21/2021: Vectric V11 is out now. The Onefinity machines and post processors are now included in the software and do not require being manually downloaded into the program! There is now a machine configuration management selection pop up box that allows you to select the Onefinity and the specific machine configuration you have. You should only need to download the below post processors if you are using V10.5 or below. PP UPDATED 12/16/2020 Here releases of the Post Processors for Vectric…

---

<div class="post-metadata">

**Author:** ![JDCrafters](https://avatars.discourse-cdn.com/v4/letter/j/c89c15/32.png) [@JDCrafters](https://forum.onefinitycnc.com/u/JDCrafters)\
**Post date:** [June 3, 2021, 12:56am UTC](https://forum.onefinitycnc.com/t/post-processor-for-vcarve-desktop/5903/3 "2021-06-03T00:56:23Z")

</div>

Thank you. I think I have this loaded correctly. I had read that before but was not sure it was for VCarve Desktop.

---

<div class="post-metadata">

**Author:** ![pootaholic](https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/32.png) [@pootaholic](https://forum.onefinitycnc.com/u/pootaholic)\
**Post date:** [June 3, 2021, 2:41am UTC](https://forum.onefinitycnc.com/t/post-processor-for-vcarve-desktop/5903/4 "2021-06-03T02:41:45Z")

</div>

Pretty sure it includes all of Vectric’s products (VCarve Desktop/VCarve Pro/Aspire).