# Post Processor Help

**URL:** <https://forum.onefinitycnc.com/t/post-processor-help/40172>\
**Category:** General Discussion\
**Created:** [September 14, 2026, 3:27pm UTC](https://forum.onefinitycnc.com/t/post-processor-help/40172 "2026-09-14T15:27:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![evanhawkins04](https://avatars.discourse-cdn.com/v4/letter/e/439d5e/32.png) [@evanhawkins04](https://forum.onefinitycnc.com/u/evanhawkins04)\
**Post date:** [September 14, 2026, 3:27pm UTC](https://forum.onefinitycnc.com/t/post-processor-help/40172/1 "2026-09-14T15:27:11Z")

</div>

I constantly have to go into my g-code and modify a few things to get it to run good but I’m getting sick of that. what post processor do i use for a gen 2 elite Forman with ATC, where do I download it?

---

<div class="post-metadata">

**Author:** ![evanhawkins04](https://avatars.discourse-cdn.com/v4/letter/e/439d5e/32.png) [@evanhawkins04](https://forum.onefinitycnc.com/u/evanhawkins04)\
**Post date:** [September 14, 2026, 3:30pm UTC](https://forum.onefinitycnc.com/t/post-processor-help/40172/2 "2026-09-14T15:30:33Z")

</div>

![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/a/5a4d2aa2fb7bdfd7b8f90380b0a32f1408e64f2c.png)for example i like to get rid of the extra parenthesis and add in a g4 p3 after spindle turns on. Do I need to be doing what I’m doing?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [September 14, 2026, 3:48pm UTC](https://forum.onefinitycnc.com/t/post-processor-help/40172/3 "2026-09-14T15:48:31Z")

</div>

The ones built into vectric are what you should use. Use the machine configurator, select onefinity, redline elite. you do not need different post processor for the onefinity easy atc.

---

<div class="post-metadata">

**Author:** ![kleer](https://avatars.discourse-cdn.com/v4/letter/k/ebca7d/32.png) [@kleer](https://forum.onefinitycnc.com/u/kleer)\
**Post date:** [September 15, 2026, 8:33pm UTC](https://forum.onefinitycnc.com/t/post-processor-help/40172/4 "2026-09-15T20:33:13Z")

</div>

What about when using Carveco?