# Probing for Z connect magnet

**URL:** https://forum.onefinitycnc.com/t/probing-for-z-connect-magnet/6344
**Category:** Touch Probe
**Created:** [June 23, 2021, 8:22pm UTC](https://forum.onefinitycnc.com/t/probing-for-z-connect-magnet/6344 "2021-06-23T20:22:06Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![greeng64](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/greeng64/32/3181_2.png) [@greeng64](https://forum.onefinitycnc.com/u/greeng64)
#### Post date: [June 23, 2021, 8:22pm UTC](https://forum.onefinitycnc.com/t/probing-for-z-connect-magnet/6344/1 "2021-06-23T20:22:06Z")

</div>

I just got my probe and I am probing for Z, each time I hit probe it tells me to connect the magnet to the collet. It is attached to the collet.

---

<div class="post-metadata">

### Author: ![greeng64](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/greeng64/32/3181_2.png) [@greeng64](https://forum.onefinitycnc.com/u/greeng64)
#### Post date: [June 23, 2021, 8:24pm UTC](https://forum.onefinitycnc.com/t/probing-for-z-connect-magnet/6344/2 "2021-06-23T20:24:05Z")

</div>

Never mine I didn’t read enough, I had to touch the block to the bit

Thanks