# Problem homing machine Z Axis

**URL:** <https://forum.onefinitycnc.com/t/problem-homing-machine-z-axis/18351>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [January 24, 2023, 4:40pm UTC](https://forum.onefinitycnc.com/t/problem-homing-machine-z-axis/18351 "2023-01-24T16:40:18Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 24, 2023, 8:50pm UTC](https://forum.onefinitycnc.com/t/problem-homing-machine-z-axis/18351/6 "2023-01-24T20:50:03Z")

</div>

it’s not a software bug.

:[Help! My Toolpath says 'Under' or 'Over"! (with videos)](https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-with-videos/1982)

---

_[View the full topic](https://forum.onefinitycnc.com/t/problem-homing-machine-z-axis/18351)._