# Problems with probing :: EROR: Y axis position -6.708mm is less than minimum soft limit 0mm

**URL:** <https://forum.onefinitycnc.com/t/problems-with-probing-eror-y-axis-position-6-708mm-is-less-than-minimum-soft-limit-0mm/5335>\
**Category:** Uncategorized\
**Created:** [May 1, 2021, 7:35pm UTC](https://forum.onefinitycnc.com/t/problems-with-probing-eror-y-axis-position-6-708mm-is-less-than-minimum-soft-limit-0mm/5335 "2021-05-01T19:35:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![helibuff](https://avatars.discourse-cdn.com/v4/letter/h/f05b48/32.png) [@helibuff](https://forum.onefinitycnc.com/u/helibuff)\
**Post date:** [May 1, 2021, 10:22pm UTC](https://forum.onefinitycnc.com/t/problems-with-probing-eror-y-axis-position-6-708mm-is-less-than-minimum-soft-limit-0mm/5335/2 "2021-05-01T22:22:52Z")

</div>

Have a look at this post you will find your answer I think

[https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-a-faq-on-why/1982](https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-a-faq-on-why/1982)

---

_[View the full topic](https://forum.onefinitycnc.com/t/problems-with-probing-eror-y-axis-position-6-708mm-is-less-than-minimum-soft-limit-0mm/5335)._