# Project Designs

**URL:** <https://forum.onefinitycnc.com/t/project-designs/28058>\
**Category:** Uncategorized\
**Created:** [July 29, 2024, 9:30pm UTC](https://forum.onefinitycnc.com/t/project-designs/28058 "2024-07-29T21:30:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ScottS](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@ScottS](https://forum.onefinitycnc.com/u/ScottS)\
**Post date:** [July 29, 2024, 9:30pm UTC](https://forum.onefinitycnc.com/t/project-designs/28058/1 "2024-07-29T21:30:21Z")

</div>

Does anyone use the Shaper Trace to create their designs? Does it work out for you? I’m thinking about whether it would be worth it to add it to my tool box.  
Thanks

---

<div class="post-metadata">

**Author:** ![avacado](https://avatars.discourse-cdn.com/v4/letter/a/e47774/32.png) [@avacado](https://forum.onefinitycnc.com/u/avacado)\
**Post date:** [July 30, 2024, 12:36am UTC](https://forum.onefinitycnc.com/t/project-designs/28058/2 "2024-07-30T00:36:05Z")

</div>

Yes, an easy way to create an SVG. It does require some post processing most times.

---

<div class="post-metadata">

**Author:** ![ScottS](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@ScottS](https://forum.onefinitycnc.com/u/ScottS)\
**Post date:** [July 30, 2024, 8:18pm UTC](https://forum.onefinitycnc.com/t/project-designs/28058/3 "2024-07-30T20:18:56Z")

</div>

Thank for your response.