# QCW Frame Secure from Beneath

**URL:** <https://forum.onefinitycnc.com/t/qcw-frame-secure-from-beneath/8063>\
**Category:** Uncategorized\
**Created:** [October 4, 2021, 7:44pm UTC](https://forum.onefinitycnc.com/t/qcw-frame-secure-from-beneath/8063 "2021-10-04T19:44:29Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Michael1](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@Michael1](https://forum.onefinitycnc.com/u/Michael1)\
**Post date:** [October 4, 2021, 7:44pm UTC](https://forum.onefinitycnc.com/t/qcw-frame-secure-from-beneath/8063/1 "2021-10-04T19:44:29Z")

</div>

I received my QCW frame today, Yeah. My frame is secure from beneath, the instructions say assemble the frame and wasteboard MDF first, then it shows setting the y rails on the frame and then the x rails on the y… This is just like when setting up first time when I received the machine…  
My question is, could you not have one individual on each side of the machine, pick it up and another person slide the frame under the machine. Or does the rails need to be squared to the frame

Thanks  
Mike

---

_[View the full topic](https://forum.onefinitycnc.com/t/qcw-frame-secure-from-beneath/8063)._