# QCW Rollng - Folding Stand - Operation vertically? (Solved, No)

**URL:** <https://forum.onefinitycnc.com/t/qcw-rollng-folding-stand-operation-vertically-solved-no/19858>\
**Category:** Quick Change Wasteboard Frame\
**Created:** [April 4, 2023, 3:50pm UTC](https://forum.onefinitycnc.com/t/qcw-rollng-folding-stand-operation-vertically-solved-no/19858 "2023-04-04T15:50:48Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![CNC4Fun](https://avatars.discourse-cdn.com/v4/letter/c/c6cbf5/32.png) [@CNC4Fun](https://forum.onefinitycnc.com/u/CNC4Fun)\
**Post date:** [April 4, 2023, 3:50pm UTC](https://forum.onefinitycnc.com/t/qcw-rollng-folding-stand-operation-vertically-solved-no/19858/1 "2023-04-04T15:50:48Z")

</div>

I am new. Have not even received my Journeyman or R-F stand yet. Can the Journeyman run while on the Rolling -Folding stand in the vertical position? Similar to a wall mount. I presume, if it can, stabilizing the QCW frame up high is necessary.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [April 4, 2023, 3:59pm UTC](https://forum.onefinitycnc.com/t/qcw-rollng-folding-stand-operation-vertically-solved-no/19858/2 "2023-04-04T15:59:28Z")

</div>

No, it cannot. Do not use it in this configuration.

---

<div class="post-metadata">

**Author:** ![CNC4Fun](https://avatars.discourse-cdn.com/v4/letter/c/c6cbf5/32.png) [@CNC4Fun](https://forum.onefinitycnc.com/u/CNC4Fun)\
**Post date:** [April 4, 2023, 5:07pm UTC](https://forum.onefinitycnc.com/t/qcw-rollng-folding-stand-operation-vertically-solved-no/19858/3 "2023-04-04T17:07:28Z")

</div>

Could you elaborate a little? Is it rigidity of the frame. Instability, or the Axis will twist etc?? Anything that could be overcome with some ingenuity?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [April 4, 2023, 5:09pm UTC](https://forum.onefinitycnc.com/t/qcw-rollng-folding-stand-operation-vertically-solved-no/19858/4 "2023-04-04T17:09:14Z")

</div>

It will absolutely not work as it’s not intended in any way to carve on the rolling stand. 100 different points of failure with this method. If you attempt this, even with applied ‘ingenuity’, your warranty is voided as you’re using it out of the manufactures specification.

---

<div class="post-metadata">

**Author:** ![CNC4Fun](https://avatars.discourse-cdn.com/v4/letter/c/c6cbf5/32.png) [@CNC4Fun](https://forum.onefinitycnc.com/u/CNC4Fun)\
**Post date:** [April 4, 2023, 5:13pm UTC](https://forum.onefinitycnc.com/t/qcw-rollng-folding-stand-operation-vertically-solved-no/19858/5 "2023-04-04T17:13:46Z")

</div>

Good to know. I am just thinking of different ways to work within the constraints of my space. While I wait for my order. Thanks