# QCW Stand / Kreg - Wobble?

**URL:** https://forum.onefinitycnc.com/t/qcw-stand-kreg-wobble/18573
**Category:** Uncategorized
**Created:** [February 4, 2023, 6:15am UTC](https://forum.onefinitycnc.com/t/qcw-stand-kreg-wobble/18573 "2023-02-04T06:15:09Z")
**Posts on this page:** 1
**Showing post:** 5

<div class="post-metadata">

### Author: ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)
#### Post date: [February 5, 2023, 11:20am UTC](https://forum.onefinitycnc.com/t/qcw-stand-kreg-wobble/18573/5 "2023-02-05T11:20:43Z")

</div>

Hey Doinok,

I should add that if you browsed the forum, you may have seen that there are table concepts that are not tables with four legs. An example of this is

- Jim @JimHatch’s modification of the [Fisher-style table concept](https://fishersshoponline.com/plans/p/fishers-mobile-assembly-table) to accomodate the [48″x32″ Journeyman](https://www.onefinitycnc.com/product-page/onefinity-journeyman) which can be seen here:

- Here another user [does this too](https://forum.onefinitycnc.com/t/elite-table-builds/18240/4)

Here you can see a Fisher-style table that includes the capability of [Vertical clamping](https://forum.onefinitycnc.com/search?q=vertical%20clamping):

- [Box Joints and Dovetails – Post #45 by WmColl46](https://forum.onefinitycnc.com/t/box-joints-and-dovetails/7147/45)

Here I collected a few links to table concepts I found remarkable (and also a remarkable enclosure):

- [Thoughts on my table design? – Post #8 by Aiph5u](https://forum.onefinitycnc.com/t/thoughts-on-my-table-design/14109/8)

This one allows working on very high workpieces as its machine bed is open:

- [Thinking outside the box (table) – Post #10 by beukesphilip](https://forum.onefinitycnc.com/t/thinking-outside-the-box-table/12553/10)

This is made of 4" × 4" beams and looks rock-solid.

- [My table with vertical holding – Post #12 by HardtailSr](https://forum.onefinitycnc.com/t/my-table-with-vertical-holding/14133/12)

Interesting the vertical clamping vise:

- [Show us your vertical clamping methods! – Post #10 by HardtailSr](https://forum.onefinitycnc.com/t/show-us-your-vertical-clamping-methods/9035/10)

---

_[View the full topic](https://forum.onefinitycnc.com/t/qcw-stand-kreg-wobble/18573)._