# QCW Video Posted

**URL:** <https://forum.onefinitycnc.com/t/qcw-video-posted/7470>\
**Category:** Accessories\
**Created:** [August 29, 2021, 7:14pm UTC](https://forum.onefinitycnc.com/t/qcw-video-posted/7470 "2021-08-29T19:14:42Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [August 30, 2021, 5:12pm UTC](https://forum.onefinitycnc.com/t/qcw-video-posted/7470/6 "2021-08-30T17:12:51Z")

</div>

Hey Tom

> [@cyberreefguru](#):
>
> That said, I am not convinced using a straight edge for ‘flatness’ is an appropriate test of coplanar-ness of the entire waste board to the router and desk

Agreed, it’s not.

> [@cyberreefguru](#):
>
> (though I’m not sure the desk matters too much)

That would be the next, the third interesting point: If your table is not plan, is the QCW Frame able to stay plan when it has to bear the load of the machine, the wasteboard and the workpiece? **Is the QCW Frame stiffy, rigid enough** to not adopt skewness/warping of the underlying table or ground?

In the promo [video](https://www.youtube.com/watch?v=y0k6UUGZ6yw) of [Any Surface Leveling System](https://www.onefinitycnc.com/product-page/any-surface-leveling-system) (that no one should forget to order together with the QCW Frame) it is offered a solution to ensure planeness of the frame on uneven grounds - but the question is, **is the QCW Frame able to retain planeness by itself?** Or is the Any Surface Leveling System necessary _because it is not_?

---

_[View the full topic](https://forum.onefinitycnc.com/t/qcw-video-posted/7470)._