# Recipe for Creating V-Carve Inlays in Fusion 360 **URL:** \ **Category:** Gallery\ **Created:** [December 8, 2020, 5:23am UTC](https://forum.onefinitycnc.com/t/recipe-for-creating-v-carve-inlays-in-fusion-360/1989 "2020-12-08T05:23:18Z")\ **Posts on this page:** 1\ **Showing post:** 30
**Author:** ![AdamsLeatherWorks](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/adamsleatherworks/32/954_2.png) [@AdamsLeatherWorks](https://forum.onefinitycnc.com/u/AdamsLeatherWorks)\ **Post date:** [June 1, 2021, 11:07pm UTC](https://forum.onefinitycnc.com/t/recipe-for-creating-v-carve-inlays-in-fusion-360/1989/30 "2021-06-01T23:07:57Z")
I’m aware Carbide Create can do multiple tool paths. But are you saying you have successfully used Carbide Create to export g-code for their “Advanced VCarve” function (which creates one .nc file), and the Onefinity can interpret the pause in the file to prompt you for a tool change so you can switch from the pocketing tool to the v-bit? Here’s a couple of posts where I show some of the stuff I was trying to accomplish. One is a brass stamp for my leather business - the stamp needs tapered sides for durability, and flat bottoms to minimize carving depth. I ended up sending the artwork out and having the stamp milled for me. The other was a wooden address sign I made for my sister. If you can describe how to (easily) do both with Carbide Create, I’m all ears! > [@First Attempt at V-Carve](https://forum.onefinitycnc.com/t/first-attempt-at-v-carve/1696): > > This is my first attempt at v-carving. It measures 1” x 3”. I need to stamp this into leather but I’m out of time and will probably rush order a custom brass stamp online since I don’t have the knowledge or appropriate bits. I need something like my brass maker’s mark. [https://www.instagram.com/p/B\_DUDU6g2xu/?igshid=15xlxxggxbqnw](https://www.instagram.com/p/B_DUDU6g2xu/?igshid=15xlxxggxbqnw) For future projects, I’d love input on which bits I should add to my collection to engrave this sort of stuff in brass or aluminum. I’m thinking the Amana 46280-K and… > [@Fusion 360 method of Carbide's "Advanced VCarve"?](https://forum.onefinitycnc.com/t/fusion-360-method-of-carbides-advanced-vcarve/1824): > > I’m trying to make an address sign for my sister. The sign is approximately 15" tall, and 17" wide, and will be cut from 1.5" thick cedar. The pocketed area is currently shown at 1/2" deep. Since it doesn’t seem to be possible to output separate toolpaths of Carbide Create’s “Advanced VCarve” as individual GCode files, I’m trying to recreate the output with Fusion 360. Can someone please summarize the basic workflow to create a VCarve sign with flat pocketed areas? And yes, I have searched and … --- _[View the full topic](https://forum.onefinitycnc.com/t/recipe-for-creating-v-carve-inlays-in-fusion-360/1989)._