# Redline and Cold Temperatures

**URL:** <https://forum.onefinitycnc.com/t/redline-and-cold-temperatures/37714>\
**Category:** Gen 2 Elite Series\
**Created:** [March 2, 2026, 1:46am UTC](https://forum.onefinitycnc.com/t/redline-and-cold-temperatures/37714 "2026-03-02T01:46:04Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 5, 2026, 7:34pm UTC](https://forum.onefinitycnc.com/t/redline-and-cold-temperatures/37714/3 "2026-03-05T19:34:35Z")

</div>

Here’s our general recommendations:

> [@Recommended Temperature for the Onefinity CNC](https://forum.onefinitycnc.com/t/recommended-temperature-for-the-onefinity-cnc/1774):
>
> We do NOT suggest letting the screen or controller being in temperatures below 40F. Condensation (and high humidity) can build inside and damage the electronics. This is especially bad for the touchscreen. LCD screens are filled with liquid crystal which can freeze. If your machine will be in an environment with temperatures below this, we HIGHLY suggest changing the environment it will be in. The best way is to keep the building it is in heated. If that’s not possible, Disconnect all wir…

---

_[View the full topic](https://forum.onefinitycnc.com/t/redline-and-cold-temperatures/37714)._