# Redline Controller Install walkthrough video **URL:** \ **Category:** Controller (Redline) Discussion\ **Created:** [September 25, 2025, 12:40pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507 "2025-09-25T12:40:13Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![jones424](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Post date:** [September 25, 2025, 12:40pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/1 "2025-09-25T12:40:13Z")
Here is a quick video installing The New redline Controller onto the Onefinity elite machine. If you have an existing or new machine the install process is the same and pretty quick / straight forward. If you have any questions feel free to ask happy to help! [![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/7/a75408464e5a8095d2bde9ed58e5ede10329317d.jpeg "Redline CNC Controller Install") ](https://www.youtube.com/watch?v=Dc5UfuanoP4) ---
**Author:** ![rxmart2](https://avatars.discourse-cdn.com/v4/letter/r/7993a0/32.png) [@rxmart2](https://forum.onefinitycnc.com/u/rxmart2)\ **Post date:** [September 25, 2025, 5:41pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/2 "2025-09-25T17:41:07Z")
Awesome thank you, hope my promo ships soon! ---
**Author:** ![Calvin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/calvin/32/32664_2.png) [@Calvin](https://forum.onefinitycnc.com/u/Calvin)\ **Post date:** [September 25, 2025, 6:36pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/3 "2025-09-25T18:36:25Z")
Looking at that dip switch sequence on the motor the Redline uses the same motor resolution as the Masso? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [September 25, 2025, 6:42pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/4 "2025-09-25T18:42:53Z")
Correct. 1,4,5 down/off, 2,3,6 up/on. ---
**Author:** ![jones424](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Post date:** [September 25, 2025, 6:53pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/5 "2025-09-25T18:53:16Z")
you are correct! But it is good information moving forward! ---
**Author:** ![RogueMachinist](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@RogueMachinist](https://forum.onefinitycnc.com/u/RogueMachinist)\ **Post date:** [October 6, 2025, 1:45am UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/6 "2025-10-06T01:45:35Z")
Thanks first solid proof of Ethernet @2:35. The posted specs are incomplete. ---
**Author:** ![jones424](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Post date:** [October 6, 2025, 2:03am UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/7 "2025-10-06T02:03:28Z")
You are correct! Direct ethernet connection and WiFi. The over the air updates directly from the HMI or monitor is so simple. And the new desktop file management system is a game changer. ---
**Author:** ![RogueMachinist](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@RogueMachinist](https://forum.onefinitycnc.com/u/RogueMachinist)\ **Post date:** [October 6, 2025, 9:57pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/8 "2025-10-06T21:57:23Z")
Can you post a picture of this desktop file management system? We are very much in the dark ---
**Author:** ![jones424](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Post date:** [October 6, 2025, 10:57pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/9 "2025-10-06T22:57:09Z")
For sure. I have shown it a few times on my Instagram reels and stories. But I’ll get some tonight. ---
**Author:** ![MiniSkateLabs](https://avatars.discourse-cdn.com/v4/letter/m/9d8465/32.png) [@MiniSkateLabs](https://forum.onefinitycnc.com/u/MiniSkateLabs)\ **Post date:** [October 10, 2025, 6:34am UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/10 "2025-10-10T06:34:40Z")
Did you actually try WiFi? I keep getting a network error no matter what I do. I’m wondering if you did an update connected, or some other means. Then once it updated WiFi worked?! I’ll try and update and go from there. ---
**Author:** ![jones424](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Post date:** [October 10, 2025, 9:21am UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/11 "2025-10-10T09:21:02Z")
yes which version are you on? ---
**Author:** ![MiniSkateLabs](https://avatars.discourse-cdn.com/v4/letter/m/9d8465/32.png) [@MiniSkateLabs](https://forum.onefinitycnc.com/u/MiniSkateLabs)\ **Post date:** [October 10, 2025, 1:23pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/12 "2025-10-10T13:23:04Z")
Looks like 1.1.11 ![PXL_20251010_132238550.RAW-01](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/5/a5706558c0c86c362ee3b595d09ce0d1a7880410.jpeg) ---
**Author:** ![jones424](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Post date:** [October 10, 2025, 1:57pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/13 "2025-10-10T13:57:46Z")
how far is the router from your hmi? Next how does the strength look in the set up screen. Last are you using mesh or just router alone? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [October 10, 2025, 2:48pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/14 "2025-10-10T14:48:28Z")
Here’s some updates, including chat about wifi. > [@Elite Series with Redline Controller | Status Update – October 10, 2025](https://forum.onefinitycnc.com/t/elite-series-with-redline-controller-status-update-october-10-2025/35662): > > Elite Redline Status Update – November 4, 2025 The first batch of Elite Redline promo machines have shipped\*\*. Once those are complete, production will switch over to building the Rotary units, followed by ATC systems. Our factory builds in dedicated groups for efficiency — so while all of the base promo machines have been assembled, the Rotary and ATC units are next in line. Remember: part of the understanding of joining the Early Adopter Promo was that not everything would be 100% finalized… ---
**Author:** ![Jasont](https://avatars.discourse-cdn.com/v4/letter/j/df705f/32.png) [@Jasont](https://forum.onefinitycnc.com/u/Jasont)\ **Post date:** [November 3, 2025, 12:33am UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/15 "2025-11-03T00:33:36Z")
Does anyone know of any how-to videos or articles on the new redline controller? I can’t find anything about how to use the jump to line feature, how to set-up macros, etc . ---
**Author:** ![BuilderBro](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@BuilderBro](https://forum.onefinitycnc.com/u/BuilderBro)\ **Post date:** [November 5, 2025, 1:36am UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/16 "2025-11-05T01:36:20Z")
Hi do you have any info on the proper way to load files. I use vectric vcarve pro i save files onto my pc then having spotty success getting the files to the redline controller. ive used the web interface rts-x to create gcode directories then load files to one of those using rtx sometimes they appear in the files section and often not on the controller. ive tried using usb which i think worked one time but isnt working now. any ideas of how to consistently get files to the redline will be appreciated. im using a wired connection from a network extender which worked fine with my old woodworker??? ---
**Author:** ![tgunr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/tgunr/32/10947_2.png) [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Post date:** [November 5, 2025, 6:45pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/17 "2025-11-05T18:45:09Z")
Don’t think “Jump to” is ready for prime time, I always get an error when it tries to reposition. ---
**Author:** ![Jasont](https://avatars.discourse-cdn.com/v4/letter/j/df705f/32.png) [@Jasont](https://forum.onefinitycnc.com/u/Jasont)\ **Post date:** [November 6, 2025, 12:49am UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/18 "2025-11-06T00:49:27Z")
Same with me, but it would be handy. ---
**Author:** ![RTCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rtcnc/32/33487_2.png) [@RTCNC](https://forum.onefinitycnc.com/u/RTCNC)\ **Post date:** [November 6, 2025, 5:48pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/19 "2025-11-06T17:48:03Z")
The jump to line bug is a known issue. We’re trying to get it fixed for the next release (1.1.2). ---
**Author:** ![jones424](https://avatars.discourse-cdn.com/v4/letter/j/90ced4/32.png) [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Post date:** [November 21, 2025, 4:36pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507/20 "2025-11-21T16:36:27Z")
First i am sorry i didn’t seen any of these updated questions on this post. the proper way to load files over the network is using the proper domain On the controller you can find your IP address under config and networks tab at the top. Or click the three lines for the menu tab and click remote and will give you an ip as well Take that and enter directly into your address bar with nothing else in front of it and search. this menu will then allow you to see status and upload files