# Redline Spindle Dustboot

**URL:** <https://forum.onefinitycnc.com/t/redline-spindle-dustboot/29918>\
**Category:** Onefinity Spindle Kit by Redline CNC\
**Created:** [December 11, 2024, 8:53pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-dustboot/29918 "2024-12-11T20:53:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![steppp1](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/steppp1/32/28981_2.png) [@steppp1](https://forum.onefinitycnc.com/u/steppp1)\
**Post date:** [December 11, 2024, 8:53pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-dustboot/29918/1 "2024-12-11T20:53:00Z")

</div>

What Dustboot is recommended for the 80mm Redline Spindle?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [December 11, 2024, 8:58pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-dustboot/29918/2 "2024-12-11T20:58:48Z")

</div>

The Suck it dust boot works perfectly with the Redline Spindle.

---

<div class="post-metadata">

**Author:** ![steppp1](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/steppp1/32/28981_2.png) [@steppp1](https://forum.onefinitycnc.com/u/steppp1)\
**Post date:** [December 11, 2024, 9:02pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-dustboot/29918/3 "2024-12-11T21:02:27Z")

</div>

Am I assuming the Pro should work?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [December 11, 2024, 9:04pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-dustboot/29918/4 "2024-12-11T21:04:45Z")

</div>

yes, the basic and the pro will work. The pro just has extra bits and bobs.

---

<div class="post-metadata">

**Author:** ![JFab](https://avatars.discourse-cdn.com/v4/letter/j/50afbb/32.png) [@JFab](https://forum.onefinitycnc.com/u/JFab)\
**Post date:** [December 14, 2024, 9:10pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-dustboot/29918/5 "2024-12-14T21:10:36Z")

</div>

I have been emailing with Support about the dust boot for the 80mm red line spindle. If you plan on ever using the new ATC tool changer with your red line spindle I am being told the original Onefinity suck-it dust boot will not work. They did tell me they are working on a new design and will be released at some point in the future. The new dust boot will allow you to use the spindle with the ATC tool changer Just fyi
