# Redline spindle installation **URL:** \ **Category:** Elite Series (Masso & Redline) (Gen 1)\ **Created:** [December 28, 2024, 1:01pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158 "2024-12-28T13:01:06Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![OffSeasonWoodworking](https://avatars.discourse-cdn.com/v4/letter/o/58956e/32.png) [@OffSeasonWoodworking](https://forum.onefinitycnc.com/u/OffSeasonWoodworking)\ **Post date:** [December 28, 2024, 1:01pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/1 "2024-12-28T13:01:06Z")
Anything special to know about installing the Redline spindle? I t showed up last week and I have been looking for info - but can’t find any. Is it truely “plug and play”?? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [December 28, 2024, 3:42pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/2 "2024-12-28T15:42:07Z")
Manual for redline spindle is with the rest of the manuals here > **[Resources | Onefinity CNC](https://www.onefinitycnc.com/support)** > > Need technical support? Looking for manuals or videos? Look here. ---
**Author:** ![Borgorl](https://avatars.discourse-cdn.com/v4/letter/b/87869e/32.png) [@Borgorl](https://forum.onefinitycnc.com/u/Borgorl)\ **Post date:** [December 28, 2024, 8:52pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/3 "2024-12-28T20:52:50Z")
The fonts in the Redline manual look eerily similar to 1F manuals 😏 ---
**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\ **Post date:** [March 14, 2025, 9:57pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/4 "2025-03-14T21:57:33Z")
I just got my 220V Spindle kit and the install video shows a small tick mark on the spindle casing, then mentions “Install to the correct depth” however my spindle has no tick mark on it, what is the distance from the top of the spindle to where it is supposed to sit on the top edge of the 80mm mount ring? Thanks for the help! -Alex ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [March 14, 2025, 10:01pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/5 "2025-03-14T22:01:01Z")
Disregard the tick mark, that really meant nothing (was just a mark we used for testing internally). “Correct depth” is whatever depth works for the individuals setup and cutting needs. ---
**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\ **Post date:** [March 14, 2025, 10:05pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/6 "2025-03-14T22:05:40Z")
Okay thanks that helps, also I received 2 of these (I think I bought them but Nov was a bit of time back) They look like they are the risers but I tried to install them and they do not appear to fit on the 50mm frame. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/a/eab81b5566b42d02c77cbb020d78bc4114e4f1a5.jpeg) ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [March 14, 2025, 11:11pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/8 "2025-03-14T23:11:16Z")
Yes, the PID numbers in the controller would be different. Please send an email to [info@onefinitycnc.com](mailto:info@onefinitycnc.com) and they’ll assist you. ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [March 14, 2025, 11:12pm UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/9 "2025-03-14T23:12:39Z")
Did those come with your spindle kit? Those are riser blocks for Foreman Y rails. You should get 4 total, for the 4 feet. Or, you got two and should have gotten none, and we made a human mistake 🙂 ---
**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\ **Post date:** [March 15, 2025, 12:18am UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/10 "2025-03-15T00:18:22Z")
Yes they did come with the kit and I just checked my order, Order No. 52127 and I did order a set of risers, so it looks like I got shorted 2 of them. That explains my confusion on where to install them… LOL Can you guys shoot me out the mated pair of them so I can hoist it up? Thanks, -Alex ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [March 15, 2025, 12:21am UTC](https://forum.onefinitycnc.com/t/redline-spindle-installation/30158/11 "2025-03-15T00:21:08Z")
Sure! Send an email to [support@onefinitycnc.com](mailto:support@onefinitycnc.com) with the order number and shipping address!