# Redline tool changes - not prompted **URL:** \ **Category:** Controller (Redline) Discussion\ **Created:** [January 17, 2026, 10:24pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211 "2026-01-17T22:24:47Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![Jpear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jpear/32/34419_2.png) [@Jpear](https://forum.onefinitycnc.com/u/Jpear)\ **Post date:** [January 17, 2026, 10:24pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/1 "2026-01-17T22:24:47Z")
Newbie here coming from Shapeoko. I’m having a hard time with bit changes on the redline. When I create a file in Aspire with multiple tools, I’m used to a single file. I did a run today on the redline foreman and the tool change never popped up? It used the same bit for the next path. Any suggestions? Best practices for the workflow? TIA ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [January 17, 2026, 10:46pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/2 "2026-01-17T22:46:54Z")
Does this discussion help? [https://forum.onefinitycnc.com/t/machine-not-stopping-for-tool-changes/37084](https://forum.onefinitycnc.com/t/machine-not-stopping-for-tool-changes/37084) ---
**Author:** ![Jpear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jpear/32/34419_2.png) [@Jpear](https://forum.onefinitycnc.com/u/Jpear)\ **Post date:** [January 18, 2026, 4:43am UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/3 "2026-01-18T04:43:19Z")
Yes it does for creating the multiple files. I want to also use the eazy z so no as the file should be able to handle all of my tool changes. Again new, and in the tool menu I see some settings, but nothing makes sense as to be able to make a tool change. Thanks for the input. ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [January 18, 2026, 3:06pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/4 "2026-01-18T15:06:49Z")
Do you have Redline VFD selected? ---
**Author:** ![Jpear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jpear/32/34419_2.png) [@Jpear](https://forum.onefinitycnc.com/u/Jpear)\ **Post date:** [January 18, 2026, 3:26pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/5 "2026-01-18T15:26:36Z")
I do. It may be the way I am exporting files out of the aspire software. More testing today and I will post my results. Thanks for the help. Much appreciated ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [January 18, 2026, 4:37pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/6 "2026-01-18T16:37:21Z")
Also, you have your tools numbered differently in Aspire? Tool setter set up and configured? Just trying to eliminate some possible factors. ---
**Author:** ![Jpear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jpear/32/34419_2.png) [@Jpear](https://forum.onefinitycnc.com/u/Jpear)\ **Post date:** [January 18, 2026, 5:47pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/7 "2026-01-18T17:47:38Z")
I don’t have that. Can you elaborate on the tool numbering? In onefinity I have no tools. So it may be that I need to download the file to onefinity as well to match? I tried to setup the easy z but no luck so far. ---
**Author:** ![Jpear](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jpear/32/34419_2.png) [@Jpear](https://forum.onefinitycnc.com/u/Jpear)\ **Post date:** [January 18, 2026, 8:39pm UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/8 "2026-01-18T20:39:56Z")
I did some work on this today and have it fully working. I added the too changer as well. I will post all of my findings later tonight, but mainly the issue has to have been with 1. Post processor not being up to date on my vector/aspire software and 2. Settings in the redline controller enabled for tool change probe (eazy z) and 3. Tool height settings for the eazy z. I’ll try to also include pictures. Thank you for all of the support and questions that got me to this solution. ---
**Author:** ![attilah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/attilah/32/34395_2.png) [@attilah](https://forum.onefinitycnc.com/u/attilah)\ **Post date:** [January 19, 2026, 4:50am UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/9 "2026-01-19T04:50:33Z")
Curious what I did not configure, probably on the CNC itself as I exported my toolpaths from Carveco Maker, targeting Onefinity Redline, I do have the Txx and M6 commands in the GCode but the CNC did not stop for tool changes. The toolsetter is configured and manually works perfectly. I think I am missing some checkboxes on the CNC… ---
**Author:** ![attilah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/attilah/32/34395_2.png) [@attilah](https://forum.onefinitycnc.com/u/attilah)\ **Post date:** [January 20, 2026, 3:01am UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211/10 "2026-01-20T03:01:59Z")
Ok Today I had success, everything was setup right on the Readline, just had to click in the “Manual” checkbox and after that toolchange worked like a charm. I have to get used to tool numbering as that’s the only thing you’ll see on the screen, T5, T23, etc…but worked like a charm!