# Remember home for projects

**URL:** <https://forum.onefinitycnc.com/t/remember-home-for-projects/25444>\
**Category:** Controller (MASSO) Discussion\
**Created:** [February 20, 2024, 12:35pm UTC](https://forum.onefinitycnc.com/t/remember-home-for-projects/25444 "2024-02-20T12:35:47Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 20, 2024, 12:48pm UTC](https://forum.onefinitycnc.com/t/remember-home-for-projects/25444/2 "2024-02-20T12:48:19Z")

</div>

Hey Kevin,

> [@KevTN](#):
>
> If I use a “custom” zero point, meaning, not using the center or one of the corners, will the Masso controller remember that zero point after homing for each file?

What do you mean with homing? Homing has to be done only once, after the startup of the machine.

Homing ≠ Returning to home coordinates.

Have you thought of using a fence attached to the wasteboard? You would set the _workpiece zero_ related to this fence only once and you would not have to set _workpiece zero_ again for every similar workpiece: You could just re-run the same program over and over.

#### See also

- [Homing ≠ Zeroing](https://forum.onefinitycnc.com/t/keeping-zero-position/14115/44)

---

_[View the full topic](https://forum.onefinitycnc.com/t/remember-home-for-projects/25444)._
