# Removing t track

**URL:** <https://forum.onefinitycnc.com/t/removing-t-track/13754>\
**Category:** Quick Change Wasteboard Frame\
**Created:** [June 22, 2022, 2:16am UTC](https://forum.onefinitycnc.com/t/removing-t-track/13754 "2022-06-22T02:16:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![th3fallen](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/th3fallen/32/7705_2.png) [@th3fallen](https://forum.onefinitycnc.com/u/th3fallen)\
**Post date:** [June 22, 2022, 2:16am UTC](https://forum.onefinitycnc.com/t/removing-t-track/13754/1 "2022-06-22T02:16:22Z")

</div>

Has anyone considered or attempted removing the non standard T track on the qcw then tapping new holes and mounting standard ones in their place?

I plan on attempting this weekend even knowing I’ll likely have to use the Cnc to mill off the existing rails

---

<div class="post-metadata">

**Author:** ![pjdeklerk](https://avatars.discourse-cdn.com/v4/letter/p/58956e/32.png) [@pjdeklerk](https://forum.onefinitycnc.com/u/pjdeklerk)\
**Post date:** [June 22, 2022, 7:44pm UTC](https://forum.onefinitycnc.com/t/removing-t-track/13754/2 "2022-06-22T19:44:40Z")

</div>

I was thinking about screwing standard T-track directly into the QCW T-track.

---

<div class="post-metadata">

**Author:** ![reticent\_fly](https://avatars.discourse-cdn.com/v4/letter/r/278dde/32.png) [@reticent\_fly](https://forum.onefinitycnc.com/u/reticent_fly)\
**Post date:** [June 22, 2022, 7:47pm UTC](https://forum.onefinitycnc.com/t/removing-t-track/13754/3 "2022-06-22T19:47:22Z")

</div>

Haven’t tried it, but I’ll agree that the non-standard T-Track was a bit of an annoying surprise. I ended up designing a mixed/staggered grid of 3/4" dog holes and threaded inserts. The track doesn’t get used much…