# Replacement brush (not from onefinity)

**URL:** <https://forum.onefinitycnc.com/t/replacement-brush-not-from-onefinity/18095>\
**Category:** Suck It Dust Boot\
**Created:** [January 13, 2023, 4:18pm UTC](https://forum.onefinitycnc.com/t/replacement-brush-not-from-onefinity/18095 "2023-01-13T16:18:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![PCM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pcm/32/9291_2.png) [@PCM](https://forum.onefinitycnc.com/u/PCM)\
**Post date:** [January 13, 2023, 4:18pm UTC](https://forum.onefinitycnc.com/t/replacement-brush-not-from-onefinity/18095/1 "2023-01-13T16:18:36Z")

</div>

Is it possible to get a replacement brush besides through Onefinity? Not that there is anything wrong with theirs, but shipping is many times more than the brush so I am looking for a US source. Is there a generic term for this type of brush? Thanks!

---

<div class="post-metadata">

**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\
**Post date:** [January 13, 2023, 4:20pm UTC](https://forum.onefinitycnc.com/t/replacement-brush-not-from-onefinity/18095/2 "2023-01-13T16:20:14Z")

</div>

McMaster-Carr Page:  
[McMaster-Carr](https://www.mcmaster.com/strip-brushes/tight-seal-strip-brushes-6)

---

<div class="post-metadata">

**Author:** ![PCM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pcm/32/9291_2.png) [@PCM](https://forum.onefinitycnc.com/u/PCM)\
**Post date:** [January 19, 2023, 1:03am UTC](https://forum.onefinitycnc.com/t/replacement-brush-not-from-onefinity/18095/3 "2023-01-19T01:03:42Z")

</div>

Thank you!

Below is a link to the one I bought (7/32 x 3/16). Very easy to install.

[https://www.mcmaster.com/catalog/129/1551/7900T5](https://www.mcmaster.com/catalog/129/1551/7900T5)