# Rev 1.09 still locking up after pause , stop button

**URL:** <https://forum.onefinitycnc.com/t/rev-1-09-still-locking-up-after-pause-stop-button/14393>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [July 30, 2022, 5:36am UTC](https://forum.onefinitycnc.com/t/rev-1-09-still-locking-up-after-pause-stop-button/14393 "2022-07-30T05:36:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FBG](https://avatars.discourse-cdn.com/v4/letter/f/2bfe46/32.png) [@FBG](https://forum.onefinitycnc.com/u/FBG)\
**Post date:** [July 30, 2022, 5:36am UTC](https://forum.onefinitycnc.com/t/rev-1-09-still-locking-up-after-pause-stop-button/14393/1 "2022-07-30T05:36:02Z")

</div>

So i am having this issue when the pause, stop button is invoked. I am not able to do anything . i can not load a file, the only button that is working is the stop button, and when it is operated it will show an action, but nothing happens. any help with this issue would be very much appreciated.

Gene

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [July 30, 2022, 3:42pm UTC](https://forum.onefinitycnc.com/t/rev-1-09-still-locking-up-after-pause-stop-button/14393/2 "2022-07-30T15:42:19Z")

</div>

please post a detailed, narrated video of your issue here.

---

<div class="post-metadata">

**Author:** ![CNCGeek](https://avatars.discourse-cdn.com/v4/letter/c/5fc32e/32.png) [@CNCGeek](https://forum.onefinitycnc.com/u/CNCGeek)\
**Post date:** [August 30, 2022, 3:41am UTC](https://forum.onefinitycnc.com/t/rev-1-09-still-locking-up-after-pause-stop-button/14393/3 "2022-08-30T03:41:56Z")

</div>

Ive had that happen 1 time but never knew why and ive not had it happen since