# Rigid Zero Clearance Template **URL:** \ **Category:** Filefinity (Ready To Run File Sharing Site)\ **Created:** [December 10, 2022, 8:58pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294 "2022-12-10T20:58:25Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![SanderCreations](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sandercreations/32/21310_2.png) [@SanderCreations](https://forum.onefinitycnc.com/u/SanderCreations)\ **Post date:** [December 10, 2022, 8:58pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/1 "2022-12-10T20:58:25Z")
I love how I can use this for not only making cool handcrafts and such but also for useful things around the shop. I needed a zero clearance table saw insert for my Rigid. I wanted it for a 45 degree angle but I didn’t see too many out there to buy and what I saw was pretty expensive. So, why would I go out and buy something when I could spend hours tweaking and fine tuning a file then give it away to my colleagues? That would just be dumb. So, here it is if anyone else should need it. Made in VCarve. Please ignore the old Shaper tape. 😉 SVG is the raw file that will need to be cleaned up a bit. VCarve is the cleaned up file ready for use. I have the R4512 but can be adapted to any similar size insert. ![image (2)](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/6/5662a4bc32e1741b3d52d715a78af7c2c76a8df5.jpeg) ![image (3)](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/6/16e059be084bc90252211c458cd2ce404cdfe76d.jpeg) ![image (4)](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/5/e55d84baf0acd9a05ebd6f79c7a02b87e0c536cd.jpeg) [Rigidzeroclearance.crv](https://forum.onefinitycnc.com/uploads/short-url/z52A2CT80FzQDjrRx8tU4eybmKG.crv) (512.5 KB) ![Rigid zero insert](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/d/c/dcd7c25e706bfb14635e63582fe94b78fc9fd92c.svg) ---
**Author:** ![Pony](https://avatars.discourse-cdn.com/v4/letter/p/4da419/32.png) [@Pony](https://forum.onefinitycnc.com/u/Pony)\ **Post date:** [December 11, 2022, 1:31pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/2 "2022-12-11T13:31:28Z")
Thank you very much! I was getting ready to draw a generic one for myself when I saw this. Perfect timing. Pony ---
**Author:** ![DavidL](https://avatars.discourse-cdn.com/v4/letter/d/ecc23a/32.png) [@DavidL](https://forum.onefinitycnc.com/u/DavidL)\ **Post date:** [December 11, 2022, 6:48pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/3 "2022-12-11T18:48:18Z")
Which model of Ridgid saw is this for? ---
**Author:** ![SanderCreations](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sandercreations/32/21310_2.png) [@SanderCreations](https://forum.onefinitycnc.com/u/SanderCreations)\ **Post date:** [December 11, 2022, 8:45pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/4 "2022-12-11T20:45:34Z")
See above. I have the R4512 but the file can be changed as needed. ---
**Author:** ![DavidL](https://avatars.discourse-cdn.com/v4/letter/d/ecc23a/32.png) [@DavidL](https://forum.onefinitycnc.com/u/DavidL)\ **Post date:** [December 11, 2022, 10:12pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/5 "2022-12-11T22:12:11Z")
Wow, there it is, I must have missed the last sentence. Thanks ---
**Author:** ![SanderCreations](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sandercreations/32/21310_2.png) [@SanderCreations](https://forum.onefinitycnc.com/u/SanderCreations)\ **Post date:** [December 11, 2022, 10:47pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/6 "2022-12-11T22:47:56Z")
Hahaha, no, you aren’t crazy, I edited the original! ---
**Author:** ![tmuka](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/tmuka/32/7525_2.png) [@tmuka](https://forum.onefinitycnc.com/u/tmuka)\ **Post date:** [December 12, 2022, 8:00pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/7 "2022-12-12T20:00:43Z")
nice! thanks for the good idea. It looks similar to my old craftsman. I’ll have to do the same. ---
**Author:** ![ChrisM](https://avatars.discourse-cdn.com/v4/letter/c/47e85d/32.png) [@ChrisM](https://forum.onefinitycnc.com/u/ChrisM)\ **Post date:** [December 12, 2022, 10:03pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/8 "2022-12-12T22:03:25Z")
Dave, I don’t see a SVG file in your post. I do have the Rigid R4512 and would like to bring the svg in to F360. ---
**Author:** ![SanderCreations](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sandercreations/32/21310_2.png) [@SanderCreations](https://forum.onefinitycnc.com/u/SanderCreations)\ **Post date:** [December 12, 2022, 10:23pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/9 "2022-12-12T22:23:40Z")
Chris, its the image at the very bottom. ---
**Author:** ![ChrisM](https://avatars.discourse-cdn.com/v4/letter/c/47e85d/32.png) [@ChrisM](https://forum.onefinitycnc.com/u/ChrisM)\ **Post date:** [December 12, 2022, 10:35pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/10 "2022-12-12T22:35:27Z")
Wow, I didn’t think to try saving the image. Thanks ---
**Author:** ![JoeA](https://avatars.discourse-cdn.com/v4/letter/j/b38774/32.png) [@JoeA](https://forum.onefinitycnc.com/u/JoeA)\ **Post date:** [December 13, 2022, 4:34pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/11 "2022-12-13T16:34:49Z")
Thanks While I don’t need any at present this is something I use on a regular basis. I have a jet table saw if the file needs to be changed that will only be a small change. ---
**Author:** ![BigMitch](https://avatars.discourse-cdn.com/v4/letter/b/43a26b/32.png) [@BigMitch](https://forum.onefinitycnc.com/u/BigMitch)\ **Post date:** [December 26, 2022, 4:12am UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/12 "2022-12-26T04:12:37Z")
Hey Dave, thanks for sharing. I also have an R4512 zero tolerance insert file I’ve been working on with additional cutouts to improve dust collection based on some other people’s research. Not sure if they help, but they can’t hurt 🙂 I drop this note in to let people know the R4512 zero clearance insert also fits perfectly in the Grizzly G0771Z (which is what I have). ---
**Author:** ![SanderCreations](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sandercreations/32/21310_2.png) [@SanderCreations](https://forum.onefinitycnc.com/u/SanderCreations)\ **Post date:** [April 23, 2023, 2:37am UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/13 "2023-04-23T02:37:43Z")
Here is the cleaned up svg. ![Rigid zero insert](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/f/f/ff17dd685b0e7fa8be133729bfffc518ae8a7f01.svg) ---
**Author:** ![Dronekid12](https://avatars.discourse-cdn.com/v4/letter/d/779978/32.png) [@Dronekid12](https://forum.onefinitycnc.com/u/Dronekid12)\ **Post date:** [April 23, 2023, 5:14am UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/14 "2023-04-23T05:14:10Z")
I am using a Grizzly 833P. Expensive inserts. Anyone else using, here you go. ![IMG_0244](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/7/97c94b431fa18575b4dd3c29811311c686d49607.jpeg) [Tablesaw Insert 3.crv](https://forum.onefinitycnc.com/uploads/short-url/fLhXDim9RW8wV0xn6ATp61EgYlf.crv) (453.5 KB) ---
**Author:** ![Dronekid12](https://avatars.discourse-cdn.com/v4/letter/d/779978/32.png) [@Dronekid12](https://forum.onefinitycnc.com/u/Dronekid12)\ **Post date:** [April 23, 2023, 5:17am UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/15 "2023-04-23T05:17:46Z")
Iused half inch MDF and then a couple of layers of poly to seal. ---
**Author:** ![Sentra52](https://avatars.discourse-cdn.com/v4/letter/s/d6d6ee/32.png) [@Sentra52](https://forum.onefinitycnc.com/u/Sentra52)\ **Post date:** [April 23, 2023, 9:46pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/16 "2023-04-23T21:46:24Z")
Thanks for sharing the file! ---
**Author:** ![umbert](https://avatars.discourse-cdn.com/v4/letter/u/6f9a4e/32.png) [@umbert](https://forum.onefinitycnc.com/u/umbert)\ **Post date:** [January 25, 2024, 4:27pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/17 "2024-01-25T16:27:24Z")
Just an update on this old thread: Zero-Clearance Table Saw Insert for RIDGID R4512 (WITH riving knife slot) will also fit: Grizzly models G0771 and G0771Z Shop Fox 1837 (I have this one 🙂 ---
**Author:** ![ynot](https://avatars.discourse-cdn.com/v4/letter/y/a698b9/32.png) [@ynot](https://forum.onefinitycnc.com/u/ynot)\ **Post date:** [May 4, 2024, 3:31pm UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/18 "2024-05-04T15:31:06Z")
Just found the svg thank you. BTW I have a Housmann saw that must have been private labeled by Rigid, All parts are interchangeable. ---
**Author:** ![SanderCreations](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sandercreations/32/21310_2.png) [@SanderCreations](https://forum.onefinitycnc.com/u/SanderCreations)\ **Post date:** [June 14, 2024, 2:14am UTC](https://forum.onefinitycnc.com/t/rigid-zero-clearance-template/17294/19 "2024-06-14T02:14:26Z")
I think there is an svg there already. I haven’t looked in a while. I’ll take a peek and post an svg if I don’t see it.