# Rotary Axis Set-Up

**URL:** <https://forum.onefinitycnc.com/t/rotary-axis-set-up/26083>\
**Category:** Uncategorized\
**Created:** [March 22, 2024, 11:34am UTC](https://forum.onefinitycnc.com/t/rotary-axis-set-up/26083 "2024-03-22T11:34:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nammie](https://avatars.discourse-cdn.com/v4/letter/n/e36b37/32.png) [@Nammie](https://forum.onefinitycnc.com/u/Nammie)\
**Post date:** [March 22, 2024, 11:34am UTC](https://forum.onefinitycnc.com/t/rotary-axis-set-up/26083/1 "2024-03-22T11:34:34Z")

</div>

Hello…I’m looking for advice on how to connect a rotary axis to the Masso g3 Touch. I am currently designing my table for an Elite Foreman and want to incorporate a rotary axis option into my table design….thanks, Norm

Specifically:

Do I need a separate or dedicated driver or is it built into the G3?  
Schematics?  
Photos?  
Any advice at all….

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [March 22, 2024, 12:28pm UTC](https://forum.onefinitycnc.com/t/rotary-axis-set-up/26083/2 "2024-03-22T12:28:47Z")

</div>

Hey Norm,

there are a number of posts that describe what you want to know. We have a search function in this forum, you can easily find the posts that deal with rotary on Masso.

If you buy a rotary module with a bipolar stepper without integrated stepper driver, you will have to also buy a stepper driver in order to be able to run it on the MASSO controller.

---

<div class="post-metadata">

**Author:** ![Nammie](https://avatars.discourse-cdn.com/v4/letter/n/e36b37/32.png) [@Nammie](https://forum.onefinitycnc.com/u/Nammie)\
**Post date:** [March 22, 2024, 7:35pm UTC](https://forum.onefinitycnc.com/t/rotary-axis-set-up/26083/3 "2024-03-22T19:35:09Z")

</div>

Thanks …I have been searching but will experiment with different key words. I found one guys YouTube video and he used a dedicated driver that he wired in…a little perplexed because I thought the G3 Touch had an “A” axis driver built in….but, perhaps I’m just confusing items…

---

<div class="post-metadata">

**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\
**Post date:** [March 22, 2024, 7:51pm UTC](https://forum.onefinitycnc.com/t/rotary-axis-set-up/26083/4 "2024-03-22T19:51:51Z")

</div>

Most controllers like those from Masso - G3 and Touch - produce the axes signals needed (STEP/DIR) , but require you to provide the driver of choice and power source needed to control the stepper motor or servo’s motion.
