# Run job without router

**URL:** <https://forum.onefinitycnc.com/t/run-job-without-router/9549>\
**Category:** Uncategorized\
**Created:** [December 15, 2021, 12:10am UTC](https://forum.onefinitycnc.com/t/run-job-without-router/9549 "2021-12-15T00:10:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![shaco123](https://avatars.discourse-cdn.com/v4/letter/s/7ab992/32.png) [@shaco123](https://forum.onefinitycnc.com/u/shaco123)\
**Post date:** [December 15, 2021, 12:10am UTC](https://forum.onefinitycnc.com/t/run-job-without-router/9549/1 "2021-12-15T00:10:28Z")

</div>

i just setup my onefinity CNC and everything seems to be working mechanically as i can jog my machine around. i have connected to my controller with a ethernet cable and have entered the UI by typing in [http://OneFinity.local](http://OneFinity.local). i am trying to run a job without a router attached just because it is my first time and i dont want to wreck anything. i am trying to run the “Team Onefinity.ngs” and it keeps giving me an error. the error is “Estopped, Switch not found”. Can anyone help me out with this?

---

<div class="post-metadata">

**Author:** ![ChrisM](https://avatars.discourse-cdn.com/v4/letter/c/47e85d/32.png) [@ChrisM](https://forum.onefinitycnc.com/u/ChrisM)\
**Post date:** [December 15, 2021, 12:29am UTC](https://forum.onefinitycnc.com/t/run-job-without-router/9549/2 "2021-12-15T00:29:48Z")

</div>

Here’s a post that might help.

> [@"Estopped, Switch not found" - What does this mean?](https://forum.onefinitycnc.com/t/estopped-switch-not-found-what-does-this-mean/9377):
>
> What does ‘Estopped, Switch not found’ mean? 99% of the time, when users see this ‘warning’, it means that the program/gcode they are running includes an m6 (probe) command line in the code. When hitting ‘play’ to start the carve, the z axis will immediately, but slowly, move towards the wasteboard and after traveling 10mm or so the yellow warning, ‘estop, probe not found’ will pop up and everything will reset. This is a safety measure to prevent the z axis from continuously plunging in…

And another.

> [@ESTOPPED switch not found](https://forum.onefinitycnc.com/t/estopped-switch-not-found/4322):
>
> Hi all. We got our machine last night and got it set up. It moves nice with the joystick and it looks good! We hooked up the laptop and we tried to run the onefinity sign gcode to start with and kept getting “ESTOPPED switch not found”. We also got this when we tried to zero using the probe. Any thoughts? Thanks👍🏽

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [December 15, 2021, 12:56am UTC](https://forum.onefinitycnc.com/t/run-job-without-router/9549/3 "2021-12-15T00:56:57Z")

</div>

Do not run gcode you did not create!

---

<div class="post-metadata">

**Author:** ![AdamsLeatherWorks](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/adamsleatherworks/32/954_2.png) [@AdamsLeatherWorks](https://forum.onefinitycnc.com/u/AdamsLeatherWorks)\
**Post date:** [December 15, 2021, 4:03am UTC](https://forum.onefinitycnc.com/t/run-job-without-router/9549/4 "2021-12-15T04:03:00Z")

</div>

A safe way to preview a job is to place the probe on its side when you probe Z. This tricks the machine into thinking the top surface of your wood is much higher than it actually is.

---

<div class="post-metadata">

**Author:** ![Jeff62](https://avatars.discourse-cdn.com/v4/letter/j/858c86/32.png) [@Jeff62](https://forum.onefinitycnc.com/u/Jeff62)\
**Post date:** [December 22, 2021, 2:57am UTC](https://forum.onefinitycnc.com/t/run-job-without-router/9549/5 "2021-12-22T02:57:18Z")

</div>

I like the probe on its side trick. I kept getting the estopped error when I first set up my machine on a worksurface but did not also have a spoilboard. As soon as I added the spoilboard, effectively raising the Z axis without raising the machine I stopped getting the estopped error.
