# Sagging Drag Chains

**URL:** <https://forum.onefinitycnc.com/t/sagging-drag-chains/22230>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [September 5, 2023, 1:11am UTC](https://forum.onefinitycnc.com/t/sagging-drag-chains/22230 "2023-09-05T01:11:04Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![adamfenn28](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/adamfenn28/32/22878_2.png) [@adamfenn28](https://forum.onefinitycnc.com/u/adamfenn28)\
**Post date:** [September 5, 2023, 1:31pm UTC](https://forum.onefinitycnc.com/t/sagging-drag-chains/22230/18 "2023-09-05T13:31:31Z")

</div>

Here are some pictures of the problem, so it’s super clear what the issue is.

 ![IMG_1626](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/b/9b339e5265bdec0c51e89f252c16b843a4b56c17.jpeg)  
 ![IMG_1625](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/9/7929bf03ca767d45a0b1fec3a510610df792c6b7.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/sagging-drag-chains/22230)._