# Service Bulletin For Elite Masso Stepper Motor Resolution Change

**URL:** https://forum.onefinitycnc.com/t/service-bulletin-for-elite-masso-stepper-motor-resolution-change/29062
**Category:** Announcements
**Created:** [October 23, 2024, 8:37pm UTC](https://forum.onefinitycnc.com/t/service-bulletin-for-elite-masso-stepper-motor-resolution-change/29062 "2024-10-23T20:37:43Z")
**Posts on this page:** 1
**Showing post:** 5

<div class="post-metadata">

### Author: ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)
#### Post date: [October 29, 2024, 6:39pm UTC](https://forum.onefinitycnc.com/t/service-bulletin-for-elite-masso-stepper-motor-resolution-change/29062/5 "2024-10-29T18:39:13Z")

</div>

# Masso Default Configuration Files

> [@Elite Series Masso Default Machine Settings](https://forum.onefinitycnc.com/t/elite-series-masso-default-machine-settings/17451):
>
> Elite Series Masso Machine Settings: (updated: 11/3/25) Part 1, 2, and 3 must be done in order. :one:Part 1: Firmware Before performing the two steps below, ensure the Masso firmware is 5.13 or later ([Click Here to learn how to update your firmware, which is different than the below config reset](https://docs.masso.com.au/getting-started-guides/installing-masso/loading-software-to-masso-touch)) :down\_arrow:Watch the video below to learn how to update the firmware of the Masso Controller down_arrow[[Load software on your MASSO Touch - MASSO Top Tip 6] ](https://www.youtube.com/watch?v=1jgQOGZrI8M) Loading these settings w…

---

_[View the full topic](https://forum.onefinitycnc.com/t/service-bulletin-for-elite-masso-stepper-motor-resolution-change/29062)._