# Setting up of the elite foreman masso x motor error

**URL:** <https://forum.onefinitycnc.com/t/setting-up-of-the-elite-foreman-masso-x-motor-error/37104>\
**Category:** Troubleshooting (Elite Series)\
**Created:** [January 7, 2026, 12:47am UTC](https://forum.onefinitycnc.com/t/setting-up-of-the-elite-foreman-masso-x-motor-error/37104 "2026-01-07T00:47:42Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 7, 2026, 3:30pm UTC](https://forum.onefinitycnc.com/t/setting-up-of-the-elite-foreman-masso-x-motor-error/37104/4 "2026-01-07T15:30:16Z")

</div>

Try to clear the motor alarms:

> [@How To Clear Motor Alarms On Onefinity Elite Masso. FAQ](https://forum.onefinitycnc.com/t/how-to-clear-motor-alarms-on-onefinity-elite-masso-faq/25035):
>
> If you have issue with alarms on the motor or control screen or axis are counting down but not moving, try the following: Special Notes: This does not apply to SOFT Alarms. See more on that here: [Help! My Toolpath says 'Under' or 'Over" (BB controllers) OR 'Soft Alarm on AXIS" (Masso controllers)! (with videos)](https://forum.onefinitycnc.com/t/help-my-toolpath-says-under-or-over-bb-controllers-or-soft-alarm-on-axis-elite-controllers-with-videos/1982) Before doing anything, ensure you blow out each light sensor. Dust build up can affect the light sensing. Use compressed air and a microfiber towel to clean. Direct sunlight can also …

---

_[View the full topic](https://forum.onefinitycnc.com/t/setting-up-of-the-elite-foreman-masso-x-motor-error/37104)._