# Setup for "traditional" dovetails"

**URL:** <https://forum.onefinitycnc.com/t/setup-for-traditional-dovetails/13723>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [June 20, 2022, 3:12pm UTC](https://forum.onefinitycnc.com/t/setup-for-traditional-dovetails/13723 "2022-06-20T15:12:22Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![GregoryG](https://avatars.discourse-cdn.com/v4/letter/g/97f17d/32.png) [@GregoryG](https://forum.onefinitycnc.com/u/GregoryG)\
**Post date:** [June 21, 2022, 1:12am UTC](https://forum.onefinitycnc.com/t/setup-for-traditional-dovetails/13723/5 "2022-06-21T01:12:40Z")

</div>

yes, you will see in the second video there in the left column under dovetail parameters it has an use roughing tool option

also here are some members doing it[Box Joints and Dovetails](https://forum.onefinitycnc.com/t/box-joints-and-dovetails/7147/13)

---

_[View the full topic](https://forum.onefinitycnc.com/t/setup-for-traditional-dovetails/13723)._