# Shapeoko gcode files **URL:** \ **Category:** CAD (General)\ **Created:** [October 27, 2021, 5:45pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527 "2021-10-27T17:45:25Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Pa12pilot](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@Pa12pilot](https://forum.onefinitycnc.com/u/Pa12pilot)\ **Post date:** [October 27, 2021, 5:45pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/1 "2021-10-27T17:45:25Z")
This is probably a dumb question, but here goes anyway. Do all of the files I have saved as Shapeoko gcode need to be resaved as Onefinity or will they be read correctly by the onefinity? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [October 27, 2021, 6:03pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/2 "2021-10-27T18:03:46Z")
They will need to be resaved in carbide create (assuming you made them there) using the grbl post processor in their selection at the top. ---
**Author:** ![Pa12pilot](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@Pa12pilot](https://forum.onefinitycnc.com/u/Pa12pilot)\ **Post date:** [October 27, 2021, 6:08pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/3 "2021-10-27T18:08:38Z")
Thanks, I made all of the files in Vectric V carve Pro using Vectric Shapeoko post processor. I assume that also holds true for Vectric. ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [October 27, 2021, 6:13pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/4 "2021-10-27T18:13:17Z")
Same, You’ll just resave them using the Onefinity post processor. ---
**Author:** ![Ken](https://avatars.discourse-cdn.com/v4/letter/k/cc9497/32.png) [@Ken](https://forum.onefinitycnc.com/u/Ken)\ **Post date:** [October 28, 2021, 6:44pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/5 "2021-10-28T18:44:11Z")
I had a Shapeoko as my first CNC, now Onefinity. I can confirm it is necessary to resave using the Onefinity post processor for Vcarve Pro and Aspire. ---
**Author:** ![Pa12pilot](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@Pa12pilot](https://forum.onefinitycnc.com/u/Pa12pilot)\ **Post date:** [October 28, 2021, 8:31pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/6 "2021-10-28T20:31:20Z")
Thanks, Ken. I appreciate the help. I am in Alaska so with dark winter on its way, I will have something to do saving the files. ---
**Author:** ![Ken](https://avatars.discourse-cdn.com/v4/letter/k/cc9497/32.png) [@Ken](https://forum.onefinitycnc.com/u/Ken)\ **Post date:** [October 29, 2021, 8:05pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/7 "2021-10-29T20:05:25Z")
@Pa12pilot I spent a little time in Alaska during my USAF days. But for me, short couple weeks at a time and generally in the summer months when the sun never set. North of Fairbanks. My advice if moving is not an option, get large lights and use the ‘Daylight’ frequency. Take care! ---
**Author:** ![Pa12pilot](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@Pa12pilot](https://forum.onefinitycnc.com/u/Pa12pilot)\ **Post date:** [October 29, 2021, 8:27pm UTC](https://forum.onefinitycnc.com/t/shapeoko-gcode-files/8527/8 "2021-10-29T20:27:32Z")
Since I have been here most for many years I am used to it. With fishing closed down for winter I have a lot of fun doing CNC projects.