# Should we be bringing our controllers inside for the cold snap?

**URL:** <https://forum.onefinitycnc.com/t/should-we-be-bringing-our-controllers-inside-for-the-cold-snap/17559>\
**Category:** Uncategorized\
**Created:** [December 21, 2022, 8:33pm UTC](https://forum.onefinitycnc.com/t/should-we-be-bringing-our-controllers-inside-for-the-cold-snap/17559 "2022-12-21T20:33:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Auntjemimma](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/auntjemimma/32/8450_2.png) [@Auntjemimma](https://forum.onefinitycnc.com/u/Auntjemimma)\
**Post date:** [December 21, 2022, 8:33pm UTC](https://forum.onefinitycnc.com/t/should-we-be-bringing-our-controllers-inside-for-the-cold-snap/17559/1 "2022-12-21T20:33:22Z")

</div>

Looks like its going to get down to 15 degrees for me down here in south Texas.

---

<div class="post-metadata">

**Author:** ![newbiee](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/newbiee/32/8326_2.png) [@newbiee](https://forum.onefinitycnc.com/u/newbiee)\
**Post date:** [December 21, 2022, 9:08pm UTC](https://forum.onefinitycnc.com/t/should-we-be-bringing-our-controllers-inside-for-the-cold-snap/17559/2 "2022-12-21T21:08:17Z")

</div>

Yes, as a central Minnesotan, the cold makes electronics struggle, and it’s better to be safe than sorry.  
Onefinity recommends not operating the machine under 40\*f I believe.

---

<div class="post-metadata">

**Author:** ![Auntjemimma](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/auntjemimma/32/8450_2.png) [@Auntjemimma](https://forum.onefinitycnc.com/u/Auntjemimma)\
**Post date:** [December 21, 2022, 9:20pm UTC](https://forum.onefinitycnc.com/t/should-we-be-bringing-our-controllers-inside-for-the-cold-snap/17559/3 "2022-12-21T21:20:11Z")

</div>

Even if I wont be operating it?

---

<div class="post-metadata">

**Author:** ![AdamsLeatherWorks](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/adamsleatherworks/32/954_2.png) [@AdamsLeatherWorks](https://forum.onefinitycnc.com/u/AdamsLeatherWorks)\
**Post date:** [December 22, 2022, 3:21pm UTC](https://forum.onefinitycnc.com/t/should-we-be-bringing-our-controllers-inside-for-the-cold-snap/17559/4 "2022-12-22T15:21:51Z")

</div>

I’ve heard of people saying the screen fell off the front of their monitor in extreme cold conditions. So if anything, you might want to bring the display inside. Personally, I’m not worried about my machine - I had mine when we had those freezing temps and power outages in Texas and nothing happened to my machine. I’m NW of DFW, west of Denton.